Craftsman 320 Series Owner's Manual page 8

Fig.5
Operation panel
4
Power bar indicator:
The indictor has three LEDs for indicating battery capacity; press the "POWER BAR"
button, the LEDs will be light. It will extinguish automatically in about five seconds. All
the LEDs light up showing the battery has full capacity. The rightest LED begins to
wink showing low battery; it reminds you of replacing batteries or powering it with
AC/DC adapter.
Using the Laser-Enhancing Glasses Provided
This green laser level includes a pair of standard safety glasses that are made of a
laser-light enhancing material. The purpose of these glasses is to improve the viewing
of the tool's laser line.
WARNING: These glasses WILL NOT protect the eyes from damage that
could result from looking directly into the laser projection.
Adjustment of X&Y wheels to center the bubbles
To level the green rotary laser level, operate as
following instructions:
1. If the Green rotary laser Level is in horizontal
position, adjust the "X"&"Y" wheels. The "X" wheel
controls the X bubble vial, and "Y" wheel control Y
bubble vial. Adjust the two wheels to make sure the
1. Power button: turn on/off the tool.
2. Rotation button: adjust the
rotation speed.
3. Chalk line button: adjust the
length of chalk line.
4. Left button: move chalk line or
1
laser dot to left position.
2
3 5. Right button: move chalk line or
5
laser dot to right position.
6. Power bar indicator: show battery
6
capacity.
7
7. Power bar button: turn on/off the
Power bar indicator
8
Fig.6