Application - Craftsman 320 Series Owner's Manual

• Adjust the laser height
1. Support the base of the platform with one hand to hold the tool
2. Pull the handle upwards to loose it as fig.19 shown.
3. Adjust the height of the platform to your desired position; the adjustable platform
height is up to 7 1/2".
4. Pull the handle downwards to lock the platform. To fix the platform firmly, you can
tighten the secure screw clockwise as fig.21 shown.
Fig.20 Fig.21
APPLICATIONS
Using the green rotary laser level
This level can be easily used in several ways. It can be hand-held for point marking
and simple alignment, placed on a level surface, mounted on the wall mount base or
on a tripod (sold separately) to project a pulsing dot "chalk line" as a horizontal level
line or vertical plumb line. Be sure re-leveling (re-calibrating) the rotary laser level
every time you change its position.
Fig. 22
Working with obstructions and user
interference
Figure 22 illustrates the nature of the laser
"line" projected from the rotary laser level. It
is actually a "dot" of laser light that is
projected as a pulse. This is important
because obstructions and user interference
that takes place in front of the device WILL
16