Drummond 63317 Owner's Manual & Safety Instructions

Drummond 63317 Owner's Manual & Safety Instructions

1/10 hp non-submersible transfer pump

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Do not return
pump to the store.
Call 1-844-416-9141
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19b

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 63317 and is the answer not in the manual?

Questions and answers

Summary of Contents for Drummond 63317

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Fluid Type

    The Pump is designed for use with water with a maximum temperature of 77° F (25°C). Do not use the pump for other fluids, especially not fuels, cleaning fluids, or other chemical products. Page 2 For technical questions, please call 1-888-866-5797. Item 63317...
  • Page 3: Power Supply

    Removing water from swimming pools or General purpose removal or transfer of clear water. spas. Septic or sewage systems. 4. This pump can also be used to transfer water (e.g. household, farming, plumbing). Item 63317 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4: Installation Instructions

    2. Clean sludge/debris from inlet screen. 5. Manually operate any flow switch (not included) to determine that pump turns on/off as intended. 3. Make sure discharge pipe is free from leaks. Page 4 For technical questions, please call 1-888-866-5797. Item 63317...
  • Page 5: Troubleshooting

    3. Back flow of water from 3. Install or inspect check valve (sold separately). discharge hose. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 63317 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Parts List

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 6 For technical questions, please call 1-888-866-5797. Item 63317...
  • Page 7: Assembly Diagram

    Assembly Diagram Item 63317 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents

Save PDF