IgniteNet GLinq GL-I-1GE-1C Quick Start Manual page 3

8. Complete the Device Configuration
a. Manage the AP with the IgniteNet Cloud Controller
Go to https://cloud.ignitenet.com to register your AP. Log in and
select Devices from the menu. Click Add Device and enter the AP
serial number and MAC address to register the AP with your cloud
network. (The serial number and MAC address can be found on the
product packaging or label.)
b. Manage the AP in Stand-Alone Mode (Optional)
To access the web interface, connect a PC directly to the AP's Eth RJ-
45 port. In a web browser, enter the AP's default management IP
address of 192.168.1.20 to access the web login page.
If you select to manage the AP in stand-alone mode, use the web
interface to manually make your configuration changes.
For more information on AP configuration in stand-alone mode,
refer to the HeliOS User Manual, which can be downloaded from:
https://support.ignitenet.com
Note: To reset the Bridge AP to factory default settings,
press and hold down the AP's Reset button for 5 seconds. A
quick press of the Reset button reboots the AP.
Log in to the web interface
using the default settings:
◆ Login Name — root
◆
Password — admin123
– 3 –
Quick Start Guide