Siemens NCU 7 0.2 Series Manual page 22

Description
3.2 Illustration
Control Units with PROFINET
The following figure shows an NCU 720.2 PN/730.2 PN with its interfaces and control and
display elements (fault LEDs and status indicators).
CAUTION
The PROFINET interfaces of the integrated PLC 319-3 PN/DP are permanently assigned to
the option slot on the "PN NCUs". Forceful removal of the interface module will cause
defects, which can only be repaired at the factory.
Figure 3-2 Representation of the NCU 720.2 PN/730.2 PN
22
Manual, 02/2011, 6FC5397-0AP20-0BA0
NCU 7x0.2