Trouble Shooting - Sharp Healsio KN-H24INA Operation Manual

Household use
Table of Contents

Advertisement

Available languages

Available languages

TROUBLE SHOOTING

The following problems are common and are not signs that the appliance is malfunctioning.
Problem
The appliance
makes sounds
during operation.
The display doesn't
show how long Keep
Warm has been on.
The display gets
foggy.
The time displayed
during cooking
increases,
decreases suddenly,
or stops for some
time.
The settings are
disappeared.
The time display
vanishes when I
unplug the power
cord.
You may hear the following sounds during the cooking. It is common.
 -The sound that the appliance controls the heating.
-The sound that the stirring unit works.
Is the stirring unit attached correctly?
When Keep Warm ends, the display will show the current time after
12 hours.
The display can become foggy depending on the environment
(room temperature etc.). The fog will go away on its own.
Is the gasket in the center of the inner lid installed correctly?
Can you see the engraved "FRONT" on it?
While [APPROX.] is displayed, the shown time is the estimated cooking
time. A micro computer controls the cooking, so once the remaining time
has been calculated [APPROX.] will disappear.
(Estimated cooking time)
Did you press the START button at the end?
If you forget to press the START button a reminder sound will beep for
3 minutes, after which the settings will be reset. 
If the time display shows [
the internal battery is empty. Contact the Customer Service for changing the battery.
You cannot change the battery yourself.
(If plugged in, the appliance can be used as usual even if the battery is empty.
However, you will have to set the current time every time you use the Timer)
Regarding the lithium battery (inside the appliance)
Purpose of the battery:
Current time will be displayed even if the power cord is not plugged in.
and
settings will be stored.
If the internal battery is empty:
The time display and stored Timer data will be lost.
*The battery will not run out while the appliance is plugged in, as the
current time display will operate on electricity from the power plug.
en-20
Answer
Time may increase
in some circumstances.
(Exact time left)
] (blinking) after plugging in the power cord,

Advertisement

Table of Contents
loading

Table of Contents