Timer - Sharp Healsio KN-H24INA Operation Manual

TIMER

The appliance can complete cooking at a preset time (in maximum 12hours)
The Timer cooking can be used for the AUTO menus which the TIMER button lamp ashes
during setting the menu number. There are two memory banks for the Timer cooking.
Press once ：
Press twice：
* Suppose you want to set AUTO menu [2-18] ratatouille in the memory bank 2 as the
cooking completion time is 18:30.
1
Before operating, make sure to connect the power cord correctly.
Set the menu number. (See page en-11)
❶
1
Begin to set the cooking mode.
❸
3
① Select the category [2].
② Con rm the category [2].
2
Select the memory bank and enter the cooking completion time.
Select the memory bank 2.
The preset time [18:00] will ash.
3
Start Timer cooking.
After use, turn the appliance off. Unplug and then remove the inlet plug from the main unit.
NOTES : 1. If you attempt to start the appliance with a Timer setting exceeding the maximum of
12 hours, you will hear a reminder sound and the display will return to time that you can
set Timer.
2. If you start the appliance with a Timer setting that is shorter than the required cooking
time, cooking will start immediately and you will see the approximate time left until
cooking is complete.
(In this case, the appliance will not switch to Keep Warm after cooking is complete)
TIMER 1 (preset time: 6:00)
TIMER 2 (preset time: 18:00)
② ①
・ The TIMER button lamp will be lit.
・ Heating starts as soon as you press the START
button, and the food will be ready to eat at the set time.
・ The appliance will automatically switch to Keep Warm
(for 12 hours) after the cooking is complete.
en-15
❷
Con rm [AUTO].
❹
Select the menu [18].
.
Enter the time.
The time can be set in 10 minutes intervals.
(The time setting will be saved in the memory bank)