Start-Up; Teaching-In; Direct Pairing - HomeMatic IP Wall Thermostat - basic HmIP-WTH-B Mounting Instruction And Operating Manual

5

Start-up

5.1

Teaching-in

Read this entire section before starting the
teach-in procedure.
You can either pair the wall thermostat directly with one
or more Homematic IP devices or teach-in the device
to the Homematic IP Access Point (HmIP-HAP). After
direct pairing, configuration has to be done directly
on the device. After teaching-in to the Access Point,
configuration is done via the Homematic IP smartphone
app.
5.1.1

Direct pairing

You can connect the Homematic IP Wall
Thermostat to a Homematic IP Floor Heating
Actuator (HmIP-FALx-Cx, HmIP-FALMOT-Cx), a
Homematic IP Radiator Thermostat – basic
(HmIP-eTRV-B) or a Homematic IP Window- and
Door Contact with magnet (HmIP-SWDM).
Please make sure you maintain a distance of at
least 50 cm between the devices.
You can cancel the pairing procedure by briefly
pressing the system button (C) again. This will be
indicated by the device LED (C) lighting up red.
Start-up
53