What Is What; What Is What On The Drilling Machine - Husqvarna DMS 160 A Operator's Manual

What is what on the drilling machine?

1 Drill spindle
2 Water connector
3 Screws holding together the gearbox and the motor.
4 Switch
5 Cover for slip clutch (SMC)
6 Carbon brush cover
7 Load/power indication (LCS-Load control system).
4 –
English

WHAT IS WHAT?

8 Locking knob
9 Screws (4) for feeder rear section and gearbox
10 Feeder handle
11 Feeder rear section
12 PRCD Earth-fault breaker
13 Spanners
14 Operator's manual