Changing The Harness Position - Evenflo LiteMax 35 Owner's Manual

Changing the Harness Position

As your child grows, you will need to change the harness
strap position so they are routed through the slots closest
to the child's shoulders. The shoulder harness straps should
ALWAYS be as close as possible to, but
child's shoulders.
1
Loosen the harness straps
by pressing the harness
A
release button while
B
pulling on the straps.
2
3
A
40
NEVER above the
A
C
Slide the harness strap off
of the splitter plate .
C
Pull both harness straps
through the front of the
child restraint.
4
B
5
Attach the harness straps
to the splitter plate
IMPORTANT: Make sure
both harness straps are
installed completely on the
splitter plate, as shown.
6
A
Tighten the harness straps by pulling the adjustment strap
on front of the restraint.
D
Note: Final adjustment of the harness straps must be
completed with the baby in the child restraint.
Insert both harness straps
into the new harness
A
position slots.
IMPORTANT: When
inserting harness straps
through the slots in the seat
pad, make sure you route
them correctly through their
A
corresponding slots in the
seat shell.
A
.
C
D
A
C
41