At+Cpbw Write Phonebook Entry - Siemens TC37 Module At Command Reference

AT Command Set

4.30 AT+CPBW Write phonebook entry

Test command Response
TA returns location range supported by the current storage, the maximum
AT+CPBW=?
length of <number> field, supported number formats of the storage and the
maximum length of <text> field.
Note: The length may not be available while SIM storage is selected. If storage
does not offer format information, the format list should be empty
parenthesises.
+CPBW: (list of supported <index>s ), <nlength> , (list of supported <type>s ),
<tlength> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command.
Write command This command writes a phonebook entry to the memory location <index> of the
AT+CPBW=
active memory.
[<index>]
The memory location number <index> is followed by the phone number
[,<number>
<number> (in the format <type>) and the associated <text>.
[[,<type>]
If writing fails, an ME error +CME ERROR: <err> is returned.
[,<text>]]]
Parameter
<index>
<number>
<type>
<text>
<nlength>
<tlength>
Response
OK/ERROR/+CME ERROR
To delete a phonebook entry simply enter the location number:
AT+CPBW=<index>
To write a phonebook entry to the first free location number:
AT+CPBW=,<number>,<type>,<text>
Reference Note
GSM 07.07 If <text> contains characters which are coded differently in ASCII and GSM
(e.g. Ä, Ö, Ü), these characters have to be entered via escape sequences as
described in chapter „", pg. 11.
TC3X_ATC_01_V04.00
Location number within phonebook memory, total range is given
in test command response
Phone number, maximum length is given as <nlength> in test
command response
Type of phone number (address octet in integer format); 145 when
dialling string includes international access code character "+",
otherwise 129 (refer GSM 04.08 subclause 10.5.4.7)
Text assigned to the phone number, maximum length is given in
test command response <tlength>. Character set as specified with
+CSCS. See note below.
Max. length of phone number, normally 20, for a small number of
locations 40
Max. length of text assigned to phone number (depending on
storage type 16 - 18 characters including blanks)
Page 95 of 204 29.05.2002