Advertisement
time you power it on. Afterward, the camera restores to the position before its power-off
each time the camera is powered on.
If the HD-VI port of the camera is connected to a TEX0 video terminal, you do not need to
connect the power adapter to the camera or press the power button. When the video terminal
is powered on, it supplies power to the camera to power the camera on.
Checking the Status Indicator
Steady green: The camera is working properly.
Steady red: The camera is in sleep mode.
Alternatively blinking red and green: The camera is upgrading.
Blinking red: The camera is faulty.
Controlling the Camera
The camera supports PTZ and lens control using an HD video terminal or remote control.
To control the camera using an HD video terminal, connect the camera to the video
terminal using a serial cable. The maximum control length (cable length) is 50 m.
To control the camera using a remote control, set the infrared (IR) mode to LOCAL.
Settings
Parameter
REMOTE
IR
LOCAL
HD-MODE STANDARD
Do not manually rotate the camera or stop it from rotating when it is
powered on and working properly.
Mode
The camera forwards IR signals to a video terminal and is
controlled by the video terminal. By default, IR is set to
REMOTE.
The camera is controlled by IR signals and stops forwarding
the signals to the video terminal.
The video is displayed in standard mode.
If you select this option and set VEDIO to 720p 60, 1080p 30,
1080i 60, and 1080p 60, the actual video format are 720p 59.94
fps, 1080p 29.97 fps, 1080i 59.94 fps, and 1080p 59.94 fps,
respectively.
By default, HD-MODE is set to STANDARD, which is
Description
6
Advertisement
