Advertisement
Install the camera on the bracket by fastening 1/4"-20UNC screws.
Reverse
Purchase a bracket for reverse installation to mount the camera on a ceiling.
installation
Install the camera on the bracket by fastening 1/4"-20UNC screws.
Inverted
Purchase a bracket for inverted installation and mount the VPC620 or VPC600
installation
onto the ceiling using the bracket. The bracket must meet the following
requirements:
It is able to bear a weight of at least 10.5 kg (18.74 lb) and has a thickness
between 2 mm (0.08 in.) to 3 mm (0.12 in.).
It comes with a location pillar, which can be inserted into the location hole
of the VPC620 or VPC600. The distance between the screw hole on the
bracket and location pillar must be 14.5 mm (0.57 in.), which is also the
distance between the two holes on the bottom of the VPC620 or VPC600.
It comes with a screw hole and one or more 1/4"-20UNC screws.
When attaching the purchased bracket and VPC620 or VPC600, it is recommended that you
use a 1/4"-20UNC screw delivered with the purchased bracket rather than a 1/4"-20UNC
screw delivered with the VPC620 or VPC600 because the length of the latter may be too long
or too short to hold up the purchased bracket.
Others
Install the camera on a tripod (separately purchased).
Powering the Camera On
Connect the cables and power adapter to the camera and press the power button. About 8
seconds later, video is displayed on the display device. The camera faces forward the first
5
Advertisement
