Connecting The Base Station; To Pabx; Dialling Modes And Recall; Setting Pauses - Siemens GIGASET S880 Manual

Connecting the base station

to PABX

The following settings are only necessary
when your PABX requires them; see the
PABX user guide.

Dialling modes and recall

The current setting is indicated by
Changing the dialling mode
The following dialling modes can be
selected:
u
Touch tone dialling (DTMF)
u
Dial pulsing (DP)
¢ ¢ ¢
v Ð
Base
¢
Dialling Mode
s
Select dialling mode (
and press
a
Press and hold (idle status).
Setting recall
Your phone is preset at the factory for
operation on the main connection (recall
250 ms). For operation on a PABX, you
may have to change this value. Please
refer to the user guide for your PABX.
¢ ¢ ¢
v Ð
Base
¢
Recall
s
Select recall and press
‰
( = set value). Possible val-
ues are:
80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms,
600 ms, 800 ms.
a
Press and hold (idle status).
‰
.
Add. Features
‰
= on)
.
§OK§
Add. Features
§OK§
Connecting the base station to PABX

Setting pauses

Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key c
and sending the number.
v
Open menu.
5 5 O L
Press keys.
~
Enter a digit for the length of
the pause (1 = 1 sec.;
2 = 3 sec.; 3 = 7 sec.) and
press
§OK§
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open menu.
5 5 O 2
Press keys.
~
Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Switching temporarily to touch
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
touch tone dialling for the call.
Precondition: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.
.
.
§OK§
29