System expansions
Removing and installing 3
in the drive cage (only for the model FUJITSU
Workstation CELSIUS W570 power+ with
installation kit 1 (standard))
If you have ordered a device with installation kit 1, you can replace
3
/
inch hard disks as described below.
1
2
2
/
inch hard disks (vertical) are also installed with installation kit 1 (standard)
1
2
like the hard disks in the following sections with installation kit 2
installing 2
Desktop CELSIUS W570power+, with both installation kits)", Page
Removing the hard disk drive
In the cold-plug process, the cables connected at the back of the drive will be
disconnected automatically when the EasyChange rails are activated, as described below.
► Open the drive cage (see
► Press the brackets of the EasyChange rails on the hard disk drive in the direction of the
arrow (1) and pull the hard disk drive out of the drive cage in the direction of the arrow (2).
62
/
inch hard disks in the drive cage (only for the model FUJITSU
1
2
"Open the drive cage", Page
/
inch hard disks
1
2
38).
("Removing and
65).
Fujitsu