Indicators On The Device - Fujitsu CELSIUS W570power Operating Manual

Indicators on the device

The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
No. indicator
1, 2 Drive indicators
3 Power-on indicator
4 Hard disk indicator
Fujitsu
Description
The indicators light up when the Slim-Line drive or CD-ROM or
DVD drive of the device is accessed. You must never under any
circumstances remove the CD/DVD while the indicator light is on.
Warning: In the energy saving mode, the device must not be
disconnected from the mains, as this can result in a loss of data.
• Indicator is illuminated:
The device is switched on.
• The indicator flashes (depending on device type):
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off or disconnected from the mains. If
the device is ready for operation, it can be switched on with
the ON/OFF switch.
The indicator lights up when the hard disk drive of the device is
accessed.
1
2
3
4
Operation
23