Basic Settings - Huawei ViewPoint 9000 Series User Manual

HUAWEI 9000
User Guide
The power-on and power-off procedures of the ViewPoint 9039, ViewPoint 9036, ViewPoint
9035, and ViewPoint 9033 are the same. The power-on and power-off procedures of the
ViewPoint 9030, the ViewPoint 9039S, HUAWEI VP9039A, and HUAWEI VP903
same.
The following section takes the power
and the ViewPoint 9030 as examples,
corresponding procedures of the View
The positions of the power buttons on t
When the power cable is connected to the terminal and the green indicator o
adapter is on, it indicates that the terminal is connected to the
To power on the ViewPoint 9039, do as follows:
To power on the View
Press the power button on the rear panel to the ON position.

1.4 Basic Settings

When you use the terminal for the first time or yo
screen is displayed.
No rm
the s
video
W iza
Issue 05 (2009-11-12)
The power voltage is between 100 V and 240 V AC.
The live line (L), the neutral line (N), and protection grounding line (PE) conform
related international standards. The PE is grounded firmly.
ViewPoint 9039
Press POW ER on the remote control.
Press the power button on the front panel of the terminal.
Point 9030, choose either of the following methods:
ally, the network parameters and camera parameters are set by the administrator when
ystem is installed. You do not need to set these parameters when you use the
conferencing system. If you need to change the settin
rd.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
-on and power-off procedures of the View
and describes the differences between the
Point 9030 and those of the ViewPoint 903
he ViewPoint 9039 and the ViewPoint 90
ViewPoint 9030
u restore the default settings, the Wizard
gs, you are recommended to use
1 Basic Information
5A are the
Point 9039
9.
30 as follows:
f the power
power supply.
s to the
1-3