Changing The Small Jets - Miele KM 360 Installation Instructions Manual

Changing the small jets

To change the jets, the burner fixing
screws must first be loosened and the
upper section of the appliance
removed.
 Pull the control knobs off.
 Remove the burner components.
 Lift the top of the appliance off.
To lift out the stainless steel upper
section, lift it at the rear, slide
forwards and take it out.
To remove the ceramic upper
section, insert the supplied tool at the
corner between the appliance frame
and the worktop, lift it up and take it
out.
Conversion to another type of gas
a
b
 Remove the ignition switch .
 Using a small screwdriver, unscrew
the small jet  in the gas fitting.
 Pull out the jet with a pair of pliers.
 Fit the correct jets securely (see jet
table).
 Secure the jets against inadvertent
loosening with sealing wax.
23