Bios Setup; Battery Mounted In Horizontal Holder On The Board; Figure 1-7 Battery Removal/Installation - GE V7865 Series Hardware Reference Manual

1.8 BIOS Setup

The V7865 has an onboard BIOS Setup program (AMI BIOS) that controls many
configuration options. These options are saved in non-volatile, battery-backed
memory and are collectively referred to as the board's "CMOS Configuration."
The CMOS configuration controls many details concerning the behavior of the
hardware from the moment power is applied. See Appendix B: AMI BIOS Setup
Utility.

1.9 Battery Mounted in Horizontal Holder on the Board

For Battery Removal:
For Battery Installation:

Figure 1-7 Battery Removal/Installation

28 V7865 Hardware Reference Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1. Locate the battery on the computer. You may need to reference the product
manual if it is not easily located. See Figure 1-1.
2. Once the battery is located, take a non-conductive tool and gently pry on the
edges of the battery to lift it from the socket.
1. Observe correct polarity.
2. Press the new battery into the socket until the battery snaps into place.