Connection; Connecting Devices With 100 To 240 Vac Power Supply - Siemens SIMATIC NET PS598-1 Compact Operating Instructions

5

Connection

5.1 Connecting devices with 100 to 240 VAC
power supply
Switches for the input voltage
The socket X1 (position
voltage are located on the right-hand side of the front panel of the housing:
NOTICE
Connect and disconnect the power supply unit only when it is not energized!
The PS598-1 is not capable of hot plugging. Connecting or disconnecting the
PS598-1 when the 100 to 240 VAC power supply is on can damage the PS598-1
and the SCALANCE XR500.
Before connecting or disconnecting the PS598-1, make sure that the switch for the
input voltage is set to position "0".
NOTICE
CAUTION/DOUBLE POLE
The fuses FUSE1 and FUSE2 are in the fuse holder (position
the type F6.3AH / 250 VAC.
NOTICE
Overvoltage protection for the power supply cables
If there is any possible overload of the power supply cables, suitable overvoltage
protection is necessary. Refer to the values on the type plate.
Power supply unit PS598-1 for SCALANCE XR500
A5E03275848-04, 05/2013
①
) and the switch S1 Power (position
③
) for the input
②
). The fuses are of
11