Workcentre 3335, 3345 Control Panel Button Descriptions - Xerox Phaser 3330 Service Manual
Hide thumbs
Also See for Phaser 3330:
- Service manual (395 pages) ,
- User manual (114 pages) ,
- System administrator manual (92 pages)
Table of Contents
Advertisement
WorkCentre 3335, 3345 Control Panel Button Descriptions
Item
Name
1.
Machine Status
2.
Job Status
3.
Services
4.
Services Home
5.
Touch Screen Display Displays information and provides access to printer functions.
6.
Log in/Out
7.
Help
8.
Language
9.
Power Saver
10.
Clear All
11.
Stop
12.
Start
13.
Interrupt
14.
Dial Pause
15.
C (Clear)
16.
Alphanumeric
Keypad
Xerox Internal Use Only
Description
Displays the status of the printer on the Touch Screen.
Displays a list of all active, secure and completed jobs.
Returns the machine to active service from the Job Status or Machine
Status screen.
Provides access to the printer features (copy, scan, fax).
Provides access to password protected printer features.
Displays information about the current selection on the Touch Screen.
Changes the Touch Screen language and keyboard settings.
Enters and exits the low-power mode.
Clears previous and changed settings for the current selection. To reset all
features to their default settings, press this button twice.
Stops the current job temporarily. To cancel or resume follow the on-
screen instructions.
Starts the selected copy, scan, fax or print form job.
Pauses the current job to run a more important copy, scan.
Inserts a pause in a telephone number when it transmits a fax.
Deletes numeric value or the last digit entered using the alphanumeric
Keys.
The keypad for entering
Phaser 3330 and WorkCentre 3335/3345
General Information
1-17
Service Manual
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Phaser 3330 and is the answer not in the manual?
Questions and answers
Xerox 3345 o pornesc dar nu se inițializează nu intra in meniu rămâne siglă de la xerox dar nu trece mai departe
The Xerox Phaser 3330 may not be initializing and is stuck on the Xerox logo due to several possible reasons:
1. Toner Cartridge and Drum Cartridge Not Installed – If the printer detects that the toner or drum cartridge is not installed, it may fail to initialize. Error codes 09-500 (Toner Cartridge not installed) or 09-600 (SMart Kit Drum Cartridge not installed) could be relevant.
2. Main PWB (Printed Wiring Board) Issues – A faulty connection or failure in the Main PWB could prevent the printer from booting properly.
3. Wiring or Connector Issues – The CRUM connection (CN4 on the Main PWB) should be checked to ensure proper contact.
### Troubleshooting Steps:
1. Turn the printer off and then on again.
2. Re-seat the Toner Cartridge and Drum Cartridge.
3. Check and clean the high voltage contacts.
4. Inspect wiring connections to the Main PWB, including the CRUM connection (CN4).
5. If the issue persists, the Main PWB may need replacement.
Following these steps should help resolve the initialization issue.
This answer is automatically generated