Bosch GAA 18V-24 Original Instructions Manual page 16

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 13
OBJ_BUCH-2986-002.book Page 16 Monday, May 22, 2017 9:34 AM
16 | English
Charging External USB Devices (see figure B)
You can use the USB ports on the battery adapter to increase the battery runtime of
various battery-operated USB devices, e. g. mobile phone, MP3 player or tablet PC.
 Ensure that your external USB device can be charged using the USB port on
the battery adapter. Refer to the specifications on this in "Technical Data".
– Plug the charging cable of your USB device into the USB socket 2 on the battery
adapter 1.
– Press the On button 5 for activation of battery adapter. The On button 5 lights.
If no charger cable is connected, the USB ports are automatically disabled after
30 seconds.The On button 5 goes out.
The USB ports are disabled automatically to save power after completion of loading.
Connecting The Heating Element (see figure B)
– Plug the connector of the heating element in the socket 3 of the battery adapter 1.
– Press the On button 5 for activation of battery adapter. The On button 5 lights.
Make the setting on the Heat+ Jacket. Observe the operating instructions for
Heat+ Jacket.
– Slide the battery adapter 1 into the pocket provided in the garment or hang the
battery adapter on your belt using the belt clip 4.
Correction of Malfunctions
Problem
External USB device cannot be
charged using the USB port.
Heating element does not heat
up
* Some external USB devices cannot be charged with this battery adapter despite being consistent
with the technical data.
1 609 92A 3UP | (22.5.17)
Corrective Measure
Battery Charging
Connect the charging cable of the external USB
device to the USB socket 2 on the battery adapter
1. Activate the battery adapter 1 by pressing On
button 5.
External USB device cannot be charged using the
USB port on the battery adapter (refer to specifi-
cations in "Technical Data"*).
Battery Charging
Connect the cable of the heating element to the
socket 3 on the battery adapter 1. Activate the
battery adapter 1 by pressing On button 5.
Bosch Power Tools

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents