Canon imageFORMULA DR-M260 User Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Scanner
  5. imageFORMULA DR-M260
  6. User manual

Canon imageFORMULA DR-M260 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User Manual
• Please read this manual before operating this
scanner.
• After you finish reading this manual, store it in a safe
place for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Canon imageFORMULA DR-M260

Summary of Contents for Canon imageFORMULA DR-M260

  • Page 1 User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
  • Page 2 Canon U.S.A. Inc. e.g., on an authorized one-for-one basis when you buy a ONE CANON PARK, MELVILLE, NY 11747, U.S.A. new similar product or to an authorized collection site for recycling Tel. No. (800)652-2666 waste electrical and electronic equipment (EEE).
  • Page 3 This is not an exhaustive list. form or by any means, electronic or mechanical, including Canon is not responsible for how this scanner is used by an individual. photocopying and recording, or by any information storage or retrieval Please note that certain intellectual property is protected by copyright...
  • Page 4 CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL. CANON ELECTRONICS INC. IS NOT LIABLE FOR THE STORAGE AND HANDLING OF DOCUMENTS SCANNED WITH THIS PRODUCT, OR THE STORAGE AND HANDLING OF RESULTING SCANNED IMAGE DATA.

  • Page 5: Setup Guide

    Setup Guide Please read first. STEP 1 Checking the Accessories If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative. USB Cable AC Adapter Scanner Feed Tray Type A/Type B...
  • Page 6 Setup Disc Contents • Scanner Driver This is the scanner driver for this product. Install the following software necessary for using the scanner from the supplied Setup Disc. IMPORTANT • CaptureOnTouch When scanning with third-party software, use the scanner driver of This is a dedicated scanning application for DR Series scanners.
  • Page 7 Hard disk: 3 GB or more available space required for For details, consult your local authorized Canon dealer. installation of all software • Scanning speeds are lower if your computer’s standard USB USB interface: USB3.1 Gen1/USB2.0...
  • Page 8 Software Installation Click [Typical Installation]. IMPORTANT • Install the software before connecting the scanner to the computer. • Log on to Windows as an Administrator. • Close all other applications before installing the software. Insert the Setup Disc into the disk drive of the computer. The setup menu automatically starts up when you insert the disc into the drive.
  • Page 9 Follow the instructions on the screen to complete installation. Click [Exit] to finish installing the software. * Download the latest software for Windows from the Canon website. (See the sheet included with the scanner for the URL.)
  • Page 10 STEP 3 Connecting to a Computer Connect the scanner to the computer and the power supply. IMPORTANT • Do not connect the scanner to the computer before installing the software. • Before connecting the scanner to the computer, verify that the power of the scanner is OFF. If the power is ON, turn it OFF.

  • Page 11: Turning Off The Power

    STEP 4 Turning the Power ON The power of the scanner can be turned ON and OFF with the power When the scanner is properly connected to the computer, the button on the front of the scanner. (CaptureOnTouch) icon appears on the taskbar as follows. Make sure that the scanner and computer are connected properly.

  • Page 12: Introduction

    Introduction Thank you for purchasing the Canon imageFORMULA DR-M260 Hint Document Scanner. In Windows 8.1, it is registered at the following location. Please read the following manuals carefully and familiarize yourself with the functions of the scanner before use to ensure you sufficiently understand the functions and make the most of the scanner’s...

  • Page 13: Symbols Used In This Manual

    Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the scanner safely, always pay attention to these warnings.

  • Page 14: Table Of Contents

    Replacing Consumable Parts..........63 AC Adapter................15 Removing the Document Feed Tray ........68 Moving the Scanner .............. 16 About the Canon imageFORMULA Driver Setting Tool ..68 Handling ................16 Disposal ................17 Troubleshooting ........70 Features of the Scanner ..........18 Common Problems and Solutions......

  • Page 15: Before Using The Scanner

    If you have any questions regarding the power supply, contact your Avoid warm or humid locations, such as in the vicinity of a water local authorized Canon dealer or service representative for further faucet, water heater, or humidifier. Avoid locations where ammonia information.

  • Page 16: Moving The Scanner

    Then, contact your local authorized Canon dealer or service representative to have the unit serviced.

  • Page 17: Disposal

    Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in personal injury. Connect only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region).

  • Page 18: Features Of The Scanner

    Features of the Scanner The main features of the DR-M260 document scanner are described Auto Resolution Detection below. When enabled in the CaptureOnTouch or scanner driver settings, Compact Design this function detects the content of documents and determines the The scanner has a compact size of 285 mm (11.22")(W) x 180 mm scanning resolution automatically.
  • Page 19 Color Unevenness Reduction Function A4 Carrier sheet You can control or reduce the color irregularity at the time of the Use the separately sold carrier sheet (A4), you can scan without scan. damaging the original. Skip Blank Page Function The scanner is equipped with a Skip Blank Page function that Hint enables you to scan a document without storing images of blank Some functions may not be available depending on the software you...

  • Page 20: Names And Functions Of Parts

    Names and Functions of Parts Front View (With the Eject Tray Closed) A OPEN Lever C Document Eject Tray Pull this toward you to open the front unit. Open this for scanning. Scanned documents are output here. B Power button D Eject Tray Support Press this to turn on the scanner.
  • Page 21 Front View (With the Eject Tray Open) G Feed Extension Support K Eject Support Open this when placing long paper in the scanner. Open this when loading long documents. H Feed Support L Document Eject Extension Support Pull this out to support loaded documents. If required, pull this out to match the length of loaded documents.
  • Page 22 Back View Operating Panel A Display panel Displays jobs, messages, counters etc. button Selects the features such as user mode and jobs. A USB Connector C Menu button Connect the supplied USB cable to this connector. Displays the menu. B Power Connector D OK button Connect the supplied AC adapter to this connector.
  • Page 23 Display panel examples Menu Screen The information displayed on the display panel changes depending on the status of the scanner. The following are representative examples. Information displayed on the screen Pressing the Menu button while the Jobs Screen is displayed will cause the Menu Screen to be displayed instead.
  • Page 24 Message screen Displays the status of the scanner. While scanning, information related to feeding is displayed. When an error occurs, error code, and error details are displayed.

  • Page 25: Basic Operation

    Basic Operation Documents The scanner can scan documents ranging in size from business cards to LTR/A4. The document sizes that this scanner can scan are shown below. Align the centers Plain Paper Size Width: 50 mm to 216 mm (1.97" to 8.5") Align the leading edges Length: 54 mm to 356 mm (2.13"...
  • Page 26 • Scanning the following types of documents can cause a paper jam Passport or malfunction. To scan such a document, make a photocopy of the Size: 88 mm x 125 mm (3.46" x 4.92") (ISO standard) document and then scan the photocopy. Insert the passport into an optional carrier sheet (passport type) in an opened state.

  • Page 27: How To Place Documents

    How to Place Documents When placing long documents, pull out the document eject Scanning multiple documents extension support to match the length of those documents. Also, stand the eject stopper at the end of the eject support if necessary. Standard paper feeding should be used when scanning multiple documents of a standard size at one time.
  • Page 28 Pull out the feed support. Set the document facing down with the top edge towards the feeder. Open the feed extension support when placing long documents. After placing the document, align the document guides with both edges of the document. IMPORTANT Adjust the document guides to fit the width of the •...

  • Page 29: When Scanning A Document One Page At A Time

    • Reading speed will decrease when the scanner's temperature rises Click the [OK] button to close the settings screen. due to operation. Place the document as described in the "Scanning When scanning a document one page multiple documents" on p. at a time (non separation mode) IMPORTANT When scanning a thick document one page at a time or scanning a...

  • Page 30: Placing Cards

    • If the size of the passport differs greatly from the size of the Open the page of the passport that you want to scan. carrier sheet, a document jam may occur or the scanner's Insert the passport into the carrier sheet so that the image correction may not function properly.

  • Page 31: Placing Folded Documents

    Placing Folded Documents Place the card horizontally, with the reverse side facing you, and the top of the card facing down. Folio Scan enables you to scan documents that are larger than LTR/ A4 and therefore do not fit in the feeder. To use the function, fold the document in half lengthwise and place it into the feeder.

  • Page 32: Scanning With Carrier Sheets

    Scanning with Carrier Sheets Fold the document in half. Crease the document firmly down its center to fold the document To prevent damage to a document while scanning it, insert it into an in half. Fold the document so that its edges are neatly aligned. If optional carrier sheet before loading it in the scanner.

  • Page 33: Setting The Long Document Mode

    • As a rough guide, replace the carrier sheet after 1,000 scanning Load the document with the sealed end of the carrier operations with a single 80g/m (22 lb bond) sheet inserted. sheet as the leading edge. Setting the Long Document Mode The length of documents that can be scanned with the scanner is normally 356 mm (14.02"), but you can scan documents up to 5,588 mm (220") long by setting the scanner to the Long Document mode...
  • Page 34 Opens the scanner driver's Detail Settings screen. (See Click the [Long Document Mode] tab and specify the p. 44) Long mode. Depending on the length of the document, select [Long Document Mode (1000 mm)], [Long Document Mode (3000 mm)], or [Long Switch the scanner to non separation mode.

  • Page 35: Detecting A Document Double Feed

    Detecting a document double feed To use the double feed detection ignore function, open the [Others] tab and select the [Rapid recovery system] This scanner includes a function to detect document double feeds. By check box. using this function, the scanner will automatically stop when it detects that multiple documents have been fed at the same time.
  • Page 36 What to do when a double feed is When using the double feed detection ignore function If a document double feed is detected during scanning, document detected feeding stops when the double fed documents are ejected. The When not using the double feed detection ignore function following error is displayed in the operation panel.
  • Page 37 Buttons of Buttons of [Rapid Recovery Operating Description System] Screen Panel Saves the preview image as a [SAVE & OK Button scanned image and scans the CONTINUE] rest of the document. Discards the preview image and [STOP] Stop button stops scanning. Discards the preview image and [DISCARD &...

  • Page 38: Detecting Skewed Documents

    Detecting Skewed Documents Click the [OK] button to close the settings screen. This scanner includes a function that can detect when a document Place the document as described in the see "Scanning has been fed at a slant. When this function is used, the scanner will multiple documents"...

  • Page 39: Paper Feed Error Detection

    When a skewed document is detected Paper feed error detection Feeding automatically stops when a skewed document is detected This scanner includes a function that can detect paper feed errors. during scanning. The following error is displayed on the operation When this function is used, the scanner will stop a scanning panel.
  • Page 40 Operation when a paper feed error is Click the [OK] button to close the settings screen. detected Feeding automatically stops when a feed error is detected during Place the document as described in the see "Scanning scanning. The following error is also displayed in the operation panel. multiple documents"...

  • Page 41: Scanning Methods

    Scanning methods Scanning with CaptureOnTouch What is CaptureOnTouch? CaptureOnTouch is a scanning application that enables you to scan a document with a simple operation merely by selecting the screen panel. For details about the operations and functions, see the help of CaptureOnTouch.

  • Page 42: Scanning With Captureperfect

    From the Windows task bar, click [Start] and then select [All Programs]. Hint Then click [CapturePerfect 3.1] followed by [CapturePerfect 3.1]. If [Canon DR-M200] does not appear, reinstall the scanner driver. (See p. 8) Click [Select Scanner] in the [Scan] menu. Set the default paper size and click [OK].
  • Page 43 Configure the scanning conditions. (See p. 44) If the placed document is removed, the scan will be interrupted and the [Continue Scanning] dialog box appears. To continue scanning, add a document and click [Continue Scanning]. To stop scanning, click [Cancel Scan].

  • Page 44: Setting The Scanner Driver

    Setting the Scanner Driver When you load the driver for the first time, the selected scanner and a Configure basic scanning conditions such as the mode, page size, dialog for selecting the default paper size are displayed. resolution, and scanning side. Click [Setting] button of [Paper Size], to set the scan area and the Hint custom paper size registration and long mode.
  • Page 45 [Brightness] tab [Image control] tab Adjust the brightness and contrast of scanned images. Set the image control method for the scanned image. In addition, you can also click [Gamma] and set the gamma correction [Feeding] tab value for scanned images. [Image processing] tab Specify scanner operations related to document feeding.
  • Page 46 [Error Detection] tab User's Guide Set the items to be detected as errors during the scan. Informs you about the settings changed automatically by the driver. In addition, displays the image for which settings were currently made, [Others] tab in the illustrations. Configure special scan method and image processing settings.

  • Page 47: Setting Basic Scanning Conditions

    • [Detect automatically] detects whether the document is in color, Setting Basic Scanning Conditions grayscale, or black and white. You can configure advanced settings related to the detection method by clicking [Setting]. For details, see This section provides an overview of the basic setting items that are the Help.
  • Page 48 Scanning Documents of Unregistered Page Sizes You can register an unregistered paper of non-standard size with a name, as a custom paper size. Click the [Setting] button of [Page Size] in the [Basic] tab, to display the [Page Size Settings] dialog box. Register the paper of non-standard size in the [Custom Page Size] tab.
  • Page 49 If [Skip Blank Page] is selected, the [Setting] button is enabled, and When you want to reduce the moire patterns that appear you can adjust the level for judging whether pages are blank. when color photos in magazines and other documents are scanned at low resolutions Setting [Moire Reduction] on the [Image control] tab sheet allows you to reduce the moire patterns that are generated when color photos...
  • Page 50 When you want to reduce the color unevenness When you want to make lines and text in scanned images thicker or thinner Check the check box of [Color unevenness reduction] on the [Image control] tab to reduce the color unevenness. Drag the [Character Emphasis] slider in the [Image processing] tab to make lines and text in the scanned images thicker or thinner.
  • Page 51 • Advanced Text Enhancement is suitable for a document with a light When you want to match the orientation of images to the background color or a document with a non-uniform background text when scanning a mixture of pages with different text (such as a pattern).
  • Page 52 When you want to rotate the images of a document placed • Set [Batch Separation] on the [Others] tab to [Auto]. horizontally to correct the orientation Specify the rotation angle in [Document Orientation] on the [Others] tab. When [Batch Separation] is set to [Auto], the batch is separated after the next document is placed and scanning is continued.
  • Page 53 When you want to use multistream settings for scanning Hint Multi-stream allows you to output multiple different scanned images The following shows the setting conditions that can be set in the with a single scan operation, and output scanned images with different multistream settings.
  • Page 54 When you want to remove dots and notches that appear When you want to save a scanner driver setting in documents When you finish configuring a setting, click the [Save] button of [User Preference] to save the setting. You can remove dots and notches protruding from object outlines that appear in documents from scanned images.
  • Page 55 Function Restrictions Depending on Color Mode Setting Some of the setting items in each of the driver tabs are disabled as follows depending on the setting for [Color Mode] on the [Basic] tab. [Brightness] tab [Others] Tab Setting value Contrast Setting value Prescan Detect Automatically...
  • Page 56 [Image processing] tab Background Prevent Bleed Through / Setting value Edge emphasis Erase Dot Erase Notch smoothing Remove Background Detect Automatically Black and White Error Diffusion Advanced Text Enhancement Advanced Text Enhancement II 256-level Gray 24-bit Color (O: Available for setting, X: Not available for setting) Not available for setting if all of the following conditions in the [Auto Image Type Detection Settings] dialog box are met.

  • Page 57: More Advanced Scanning Methods (Batch Separation)

    More Advanced Scanning Methods (Batch Separation) Batch Separation (Insert blank page) Batch separation using patch code sheets Recognizes blank pages as batch separators and performs batch separation (automatic file separation) when documents containing DR-M260 supports batch separation (automatic file separation) blank pages are scanned.
  • Page 58 In Windows 8.1, it is registered at the following location. Print patchcode with a printer. Click [Start] – [All Programs] – [Canon DR-M200 Series] and then select [Patchcode] from the menu. Patchcodes can be printed in A4 and letter (LTR) sizes. Open the application and print a patchcode that is the same size as the document to be scanned.
  • Page 59 When using other ISIS-compatible applications, open the scanner Place the documents in the scanner after inserting the driver settings screen and select [Patchcode] in [Batch patchcode sheet in front of the page that separates the Separation] on the [Others] tab. files.

  • Page 60: Maintenance

    Maintenance Daily Maintenance Clean the scanner on a regular basis, as described below, to maintain Cleaning the Inside of the Scanner peak scanning quality. Dust or paper particles inside the scanner may cause lines or CAUTION smudges to appear on scanned images. Use compressed air to •...
  • Page 61 • Scratches on the sensor glass may cause marks on the images, as well as feeding errors. If there are scratches on the sensor glass, contact your local authorized Canon dealer or service representative. • Take care to ensure the anti-static brush in the front unit does...
  • Page 62 Remove the retard roller and feed roller. (See p. 65, p. 66) IMPORTANT Remove the retard roller and feed roller from the scanner to clean them, and be sure to reattach them to the scanner when cleaning is finished. Wipe the removed rollers with a cloth that has been dampened with water and thoroughly wrung out.

  • Page 63: Replacing Consumable Parts

    Replacing Consumable Parts Close the front unit by gently pushing it up on both sides until it clicks into place. Make sure that the front unit is The two rollers (feed roller and retard roller) installed in the scanner completely closed by pushing until you hear a click. are consumable parts.
  • Page 64 Opening and Closing the Front Unit Hint The location of each of the consumable parts is shown below. Open the document eject tray. Feed Roller Retard roller (inside Pull the OPEN lever and pull open the front unit toward the front unit) you.
  • Page 65 Close the document eject tray. Install the new feed roller. Close the roller cover. Replacing the Feed Roller Open the roller cover. Remove the feed roller.
  • Page 66 Replacing the Retard Roller Pull the left lever that secures the retard roller to the scanner, and remove the roller. Open the roller cover. Lift the document detection lever. Install the new retard roller by inserting the right side first.
  • Page 67 The value of [Roller Feed Count] will be reset. Press Menu button to return to the original screen Close the roller cover. Hint Reset of the counter can be done from the Canon imageFORMULA Driver Setting Tool. (See p. 69)

  • Page 68: Removing The Document Feed Tray

    What is Canon imageFORMULA Driver Setting Tool? The Canon imageFORMULA Driver Setting Tool can be used to check the information of the scanner, or to configure the maintenance settings. Canon imageFORMULA Driver Setting Tool consists of the following tabs.
  • Page 69 Start-up of the Canon imageFORMULA Driver Setting Tool Click the Start button, then click [All Programs] - [Canon DR-M200 Series] - [Canon imageFORMULA Driver Setting Tool] in that order. Canon imageFORMULA Driver Setting Tool will start. Hint In Windows 8.1, it is registered at the following location.

  • Page 70: Troubleshooting

    If a sticky substance such as glue or correction fluid is found, carefully wipe with just enough pressure to clean the area where the lines appear. If the problem cannot be solved by cleaning, the internal glass may be scratched. Contact your local authorized Canon dealer.
  • Page 71 Problem 6 Pages are missing. Problem 11 Scanned images are saved in TIFF instead of JPEG format. Solutions When the scanner driver’s [Scanning Side] setting is [Skip Blank Page], documents with very little black may Solutions When documents are scanned with CapturePerfect be unintentionally skipped.
  • Page 72 Problem 13 All of the placed documents have been scanned, Problem 16 Passport cannot be scanned as intended but the scanned image does not appear on the Solutions Depending on the condition of the carrier sheet or application. passport, the image may not be scanned completely or Solutions When [Panel-Feeding] or [Automatic Feeding] is the scanner's image correction may not function...

  • Page 73: Software Troubleshooting

    Software Troubleshooting This section describes troubleshooting problems and solutions for operating the supplied software (CaptureOnTouch and CapturePerfect). If scanning is too slow (1) Close other running programs, if any. (2) Scanning can be slowed down by memory shortage caused by memory-resident applications such as anti-virus programs.

  • Page 74: Useful Tips

    Useful tips Here are some useful tips for scanning documents. CapturePerfect Restore/backup can be performed by clicking the [Import]/[Export] Where are scanned images saved? Can the save destination be buttons in the [Commonly used settings] dialog. changed? Images are saved to the following locations, according to program What rules apply to scanned image file names? settings.
  • Page 75 How do I load and scan documents with mixed sizes? How can I attach scanned data to an e-mail (or send it as e-mail)? CaptureOnTouch Set [Page Size] to [Match original size] on the scanner driver setting • For both Standard Scanning and Scanning Shortcut, select [Attach screen, then scan.

  • Page 76: Clearing A Paper Jam

    Clearing a Paper Jam When paper jams are detected during scanning, the following error is Pull the OPEN lever and pull open the front unit toward displayed in the scanner’s display panel and scanning is interrupted. you. When a paper jam or double feed occurs during scanning, use the following procedures to clear them.
  • Page 77 IMPORTANT Make sure to pull the document out carefully, without applying too much force. If the jammed paper tears while you are pulling it out, make sure to remove any remaining pieces from inside the scanner. Close the front unit by gently pushing it up on both sides until it clicks into place.

  • Page 78: Error Message

    Scanner hardware problem. Exxx Internal scanner error. of the error code, and contact your Canon service representative. Time to Replace Roller When starting the scanner, the message screen requesting for replacement of roller is displayed.

  • Page 79: Uninstalling The Software

    Uninstalling the Software If the ISIS/TWAIN driver, CaptureOnTouch or CapturePerfect is not operating normally, follow the procedure below to uninstall them. Then, re-install the software from the Setup disc. (See p. 8) IMPORTANT Log on to Windows as an Administrator. From the Windows task bar, click the [Start] button and then [Control Panel].

  • Page 80: Appendix

    Appendix Specifications Main Unit Scanning Sensor Contact image sensor Light source Type Desktop sheetfed scanner Scanning Side Simplex/duplex Scanning Document Size Scanning modes Black and White, Error Diffusion, 256-level Plain Paper Grayscale, Advanced Text Enhancement, Size: Width: 50 mm to 216 mm (1.97" to 8.5") Advanced Text Enhancement II, 24-bit Color Length: 54 mm to 356 mm (2.13"...

  • Page 81: Replacement Parts

    • For the replacement procedure, see "Replacing Consumable Parts" System requirements on p. • Contact your local authorized Canon dealer or service The computer must comply with the necessary system requirements representative for detailed information about the replacement parts. of Flatbed Scanner Unit 102/201.

  • Page 82: Dimensions

    Dimensions 231 mm (9.09") 285mm (11.22") 367mm (14.45") 652mm (25.67")

  • Page 83: Index

    Index Barcode module ................. 81 Long Document Mode ..............33 Batch separation ..............52 Bundled software ................. 6 Menu Button ................ 22 Bypass mode ................29 Multi-stream setting ..............53 CaptureOnTouch ................ 41 Network adapter NA10 ............... 81 CapturePerfect ................42 Network adapter WA10 ..............
  • Page 84 Safety-related markings on the machine Marquages de sécurité sur la machine Marcature di sicurezza sulla macchina Sicherheitshinweise auf der Maschine Marcas de la máquina relacionadas con la seguridad Veiligheidsmarkeringen op de machine Makine üzerindeki güvenlik i aretleri [English] Switch (On) Power on [Français] Commutateur (Marche)
  • Page 85 [English] Switch (Push-On/Push-Off) Power on/off (no standby current) [Français] Commutateur (Appuyer pour Sous/hors tension (pas de courant de veille) mettre en marche/Appuyer pour arrêter) [Italiano] Interruttore a pulsante Alimentazione on/off (nessuna corrente di standby) bistabile (On/Off) [Deutsch] Schalter (Ein- und Ausschalten Ein- und Ausschalten (ohne Ruhestromaufnahme) durch Drücken) [Español]...
  • Page 86 [English] DC symbol Indicates direct current [Français] Symbole CC Indique qu’il s’agit de courant continu [Italiano] Simbolo corrente continua (C.C.) Indica la corrente continua Kennzeichnet Gleichstrom [Deutsch] Gleichstrom-Symbol [Español] Símbolo CC Indica corriente continua Geeft gelijkstroom aan [Nederlands] DC-pictogram [Türkçe] DC sembolü...
  • Page 87 CANON ELECTRONICS INC. 3-5-10 SHIBAKOEN, MINATO-KU, TOKYO 105-0011, JAPAN CANON U.S.A. INC. ONE CANON PARK, MELVILLE, NY 11747, U.S.A. CANON CANADA INC. 8000 MISSISSAUGA ROAD, BRAMPTON, ONTARIO L6Y 5Z7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59, 1185 XB AMSTELVEEN, THE NETHERLANDS CANON AUSTRALIA PTY.

Table of Contents