Prior To Connecting; Electrical Connection - Whirlpool WD 142 Instructions For Use Manual

PRIOR TO CONNECTING

C on the rating plate corre-
HECK THAT THE VOLTAGE
sponds to the voltage in your home.
E the drawer is empty before mounting.
NSURE
E
NSURE THAT THE DRAWER IS NOT DAMAGED
that the drawer door closes firmly against the
door support and that the internal door seal is
not damaged. Empty the appliance and clean
the interior with a soft, damp cloth.
D :
O NOT USE EXTENSION CORD
I
F THE POWER SUPPLY CORD IS TOO SHORT
qualifi ed electrician or serviceman install
an outlet near the appliance.

ELECTRICAL CONNECTION

T
HE EARTHING OF THIS DRAWER
cept no responsibility for injury to persons, animals or damage to
objects arising from the non-observance of this requirement.
C
ONNECTION TO THE MAINS
a qualified electrician in accordance with
the manufacture's instructions and in
compliance with local regulations.
T
HE INSTALLER
appliances correctly to the mains and for observing the
safety regulations.
O
BSERVANCE OF SAFETY DIRECTIVES
mains disconnection device or a multi-pole switch with a
minimum contact gap of 3mm be used for the installation.
D
O NOT USE MULTIPLE PLUG ADAPTERS
A
FTER THE APPLIANCE HAS BEEN INSTALLED
components must be inaccessible.
IMPORTANT INFORMATION
D
O NOT OPERATE THIS DRAWER
mains cord or plug, if it is not working proper-
ly, or if it has been damaged or dropped. Do
not immerse the mains cord or plug in water.
. Check
Keep the cord away from hot surfaces. Electri-
cal shock, fire or other hazards may result.
C
AUTION
I
N ORDER TO AVOID A HAZARD
resetting of the themal cutout, this appliance
must not be supplied through an external
switching device, such as a timer, or connect-
ed to a circuit that is regularly switched on and
off by the utility.
, have a
is compulsory. The manufacturer will ac-
The manufacturers are not liable for any
problems caused by the user's failure to ob-
serve these instructions.
must be carried out by
is responsible for connecting
requires that an accessible
if it has a damaged
due to inadvertent
.
, the electrical
3