About This Documentation - Bosch Rexroth IndraControl VAU 01.1 Series Operating Instructions Manual

VAU 01.1

1 About this Documentation

Overview – target groups and product phases
The activities, product phases and target groups that refer to the present docu-
mentation are marked in red color in the following figure.
Example:
In the product phase "Mounting (assembly/installation)", the "mechanic/electri-
cian" can execute the activity "install" using this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group
Purpose
This document instructs the technical staff of the machine manufacturer on how
to perform the mechanic and electrical installation in a safe way and on how to
commission the device.
Required qualifications: Individual who is able to assess the tasks assigned and
identify possible safety risks owing to qualification in the subject, knowledge
and experience. The individual should also be familiar with the standards and
regulations.
Scope
These operating instructions apply for the following UPS:
DOK-SUPPL*-VAU*01.1X**-IT02-EN-P
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Programmer
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
Bosch Rexroth AG
About this Documentation
Commissioning Operation
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
faults
Create
the NC program
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
1/53