General Operation; Standby / On; Selecting Modes - Hitachi AXS460BTU Instruction Manual

This instruction manual explains the basic instructions for operating this unit. Unless otherwise stated, all
operations described are based on remote control use.

General Operation

Standby / ON

rst connect the unit to the mains socket, the unit will be in Standby mode.
During Standby mode, the POWER
on the unit or on the remote control to switch the unit on. The display will show
"WELCOME
every time the unit is switched on.
After the unit is idle for about 10 seconds, the display will show "--".Press any button
(except
on the unit or on the remote control again to switch the unit back to Standby
Press
mode. The display will show "GOODBYE
The unit automatically turns to Standby mode after about 10 minutes if the TV or the

Selecting Modes

Press SOURCE on the unit repeatedly to select between AUX 1, AUX 2, BT (Bluetooth®),
OPTICAL, COAXIAL, HDMI 1, HDMI 2, and ARC mode.
Alternatively,
press AUX on the remote control repeatedly to select between AUX 1 and AUX 2 mode.
press DIGITAL on the remote control repeatedly to select between OPTICAL and COAXIAL mode.
press HDMI on the remote control repeatedly to select between HDMI 1, HDMI 2 and ARC mode.
PAIR on the remote control to select BT (Bluetooth®) mode directly.
Press
20
and MUTE) to exit the idle mode.
Function
completely, remove the mains plug from the mains socket.
completely to save energy when not in use.
.
or the volume is too close to mute.
. Press
x on level 15 after