Connecting To The Mains Supply; General Operation; Selecting Modes - Hitachi AXS030BTU Instruction Manual

Connecting to the Mains Supply

• This unit is designed to operate with the provided mains adapter.
• Connecting the unit to any other power source may damage the unit. Connect the power
plug and adapter which are attached in the package, then connect the DC plug to the unit
24V DC in, then connect the power plug to mains socket.
•
Ensure all audio connections of the unit are connected
before connecting to the mains power socket.

General Operation

• Press the button on the unit or the remote control to switch the unit to
The LED display will light up.
•
Press the button to switch the unit back to
•
completely.
When the unit is idle for approximately 10 minutes, it will automatically switch to
Standby mode.

Selecting Modes

MODE button on the unit or the remote control to cycle between
Press the
following modes:
AUX1(Phono) → AUX2(3.5) → BT → OPTICAL → COAXIAL → AUX 1 (Phono) →
AUX 1
time, it will automatically go to the mode which you have selected from last time.
For any help concerning set up and use of your Soundbar please call the Customer Helpline: 0345 604 0105
Connection interface of the unit
STANDBY
To the mains
socket
STANDBY mode.
ON mode.
mode. The LED display will
15