Related Manuals for CPS Leak-Seeker II
Summary of Contents for CPS Leak-Seeker II
- Page 1 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com ® Leak-Seeker Refrigerant Leak Detector �CE US Patent 8,555,701 OPERATION MANUAL...
- Page 2 GENERAL INFORMATION Table of Contents General Information Introduction Leak-Seeker II Specifications ® Leak-Seeker II Overview ® Operation Using the Leak-Seeker ® Searching for Leaks Maintenance Sensor Replacement Diagram Warranty Introduction Flexible metal probe: 15" (380mm) long, .25" (6.4mm) diameter High output alarm speaker Bar graph indicator displays...
- Page 3 GENERAL INFORMATION Leak-Seeker II Specifications ® Sensor: State of the art E_MOS technology. ® Gases: Detects refrigerants including those with hydrocarbon components (CFC, CH2F2, HCFC, HFC, HFO, NH3, HC. Hydrogen trace gas in 95% N2, 5% H2 mixture A2L refrigerants). CAUTION: This leak detector is not intrinsically safe.
-
Page 4: Leak-Seeker ® Ii Overview
GENERAL INFORMATION Leak-Seeker II Overview ® Leak-Seeker II is the world’s only fully automatic electronic leak ® detector with E_MOS sensor technology. Sophisticated software ® algorithms control the operation of this instrument allowing the user to quickly find the location of both small and large leaks with pin-point accuracy. -
Page 5: Using The Leak-Seeker ® Ii
OPERATION Using the Leak-Seeker ® Turning the instrument ON: Press the yellow START button once to turn the unit ON. The instrument initiates a sensor self-cleaning and conditioning cycle which lasts for 35 seconds. During that time, the tachometer lights scan from left to right. When the audible alarm turns on the instrument is ready to use. -
Page 6: Searching For Leaks
OPERATION Searching For Leaks The Leak-Seeker II is fully automatic and needs only to be ® turned on to begin leak searching. All necessary sensitivity and calibration settings are automatically selected by the unit’s advanced POWERSHIFT™ software providing optimal leak finding performance under any conditions. -
Page 9: Maintenance
All products being returned for warranty repair must be accompanied by an original bill of sale and customer contact information. CPS Products, Inc. Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176...
Need help?
Do you have a question about the Leak-Seeker II and is the answer not in the manual?
Questions and answers