Bonnet - Toyota AURION 2013 Owner's Manual

NOTICE
• If you spill the fluid, ensure to wash it off with water to prevent it from damaging the
parts or paint.
• Do not drive with the air cleaner filter removed, or excessive engine wear could
result. Also backfiring could cause a fire in the engine compartment.
• Be careful not to scratch the glass surface with the wiper frame.
• When closing the engine bonnet, check to see that you have not forgotten any tools,
rags, etc.

BONNET

To open the bonnet:
1. Pull the bonnet lock release lever. The
bonnet will spring up slightly.
2. In front of the vehicle, lift the auxiliary
catch lever and raise the bonnet.
• Before closing the bonnet, check to
see that you have not forgotten any
tools, rags, etc.
• To close the bonnet, lower it to about
waist height and drop it to close it
fully. Make sure it locks into place, if
not, open it again and drop it from a
slightly higher point.
NOTICE
To avoid damaging the panel, avoid pushing the bonnet to close it.
CAUTION
Before driving, ensure the bonnet is closed and securely locked. Otherwise, the bonnet
may open unexpectedly while driving and an accident may occur.
MAINTENANCE AND CARE
Do-it-yourself maintenance
257