Toyota Avanza Owner's Manual

Table of Contents

Quick Links

Download this manual

Table of Contents

Troubleshooting

Need help?

Do you have a question about the Avanza and is the answer not in the manual?

Questions and answers

Mr. Tolentino

January 24, 2025

Where is the fuse of the washer fluid pump?

1 comments:

Mr. Anderson

February 10, 2025

The fuse for the washer fluid pump in a Toyota Avanza is located in the driver’s side instrument panel (for right-hand drive vehicles). To access it, remove the cover and then remove the fuse. Check if the fuse is blown and replace it with a new fuse of the appropriate amperage rating, which can be found on the fuse box lid.

This answer is automatically generated

Danny

February 14, 2025

Auxiliary Oil for Toyota Avanza 1.5S... How many liters require to fill in?

David ace laxamana

February 18, 2025

What can i use engene oil for change oil my toyota avanza 2017 automatic transmission gasoline. And what size the oil filter

1 comments:

Mr. Anderson

February 18, 2025

The engine oil recommended for a Toyota Avanza oil change is 5W-30. However, the exact size of the oil filter is not specified in the provided information. It mentions that different filters may fit, but does not provide exact dimensions.

This answer is automatically generated

Rinaldo Bacordo

February 20, 2025

Can you show me the head light wiring diagram of toyota avanza 2013

Gavin

February 24, 2025

Hi,What is the parts number of the oil lever guige of Toyota Avanza 2008?

Artemio II Tan

February 26, 2025

I have a 2013 Toyota Avanza Automatic. I **** reversing while the parking assist-sensor indicator will come on and immediately engine will stopped. No obstacle or object is at my rear. Is my sensor defective or control module? Appreciate if you can help my problem. Thank you.

1 comments:

Mr. Anderson

February 26, 2025

The provided context does not mention a 2013 Toyota Avanza or describe a situation where the engine stops while reversing without obstacles. However, it does state that the Toyota parking assist sensor operates when the engine switch is in the "ON" position and the shift lever is in "R." Additionally, sensor performance can be affected by dirt, ice, or environmental conditions.

If the engine stops while reversing with no obstacles, it is unlikely to be solely due to a defective parking assist sensor or control module. Other potential causes, such as engine issues, electrical faults, or transmission problems, should be investigated. Consulting a qualified mechanic or Toyota dealer is recommended.

This answer is automatically generated

Mart

April 7, 2025

Is the wattage of headlight per bulb?

1 comments:

Mr. Anderson

April 9, 2025

The LED headlight bulbs for a Toyota Avanza are available in different wattages, including 100W, 110W, and 180W. The halogen headlight bulb has a wattage of 55W.

This answer is automatically generated

Summary of Contents for Toyota Avanza

Page 3 Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each component adjustment before driving, etc.
Page 4 TABLE OF CONTENTS For your information .......6 Operation of Reading this manual.....10 each component How to search ......11 Pictorial index .......12 3-1. Key information Keys ........78 For safety and security 3-2. Opening, closing and locking the doors Side doors ......86 1-1.
Page 5 4-5. Using the driving support Driving systems Toyota parking assist-sensor ....157 4-1. Before driving Driving assist systems..161 Driving the vehicle .....118 4-6. Driving tips Cargo and luggage ....127 Winter driving tips....165 Trailer towing Eco-friendly driving tips ..167 (except for South Africa)...128...
Page 6 TABLE OF CONTENTS Interior features Maintenance and care 6-1. Using the air conditioning 7-1. Maintenance and care system and defogger Cleaning and protecting the vehicle exterior..208 Front air conditioning system ......188 Cleaning and protecting Rear cooler system....195 the vehicle interior... 211 6-2.
Page 7 When trouble arises Vehicle specifications 8-1. Essential information 9-1. Specifications Emergency flashers ...294 Maintenance data (fuel, oil level, etc.) ..338 If your vehicle has to be stopped in Fuel information ....348 an emergency....295 9-2. Customization Fire extinguisher ....296 Customizable features ..
Page 8 Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. Using these spare parts and acces-...
Page 9 ● Seat belt pretensioner system ● Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of an RF-transmitter system. Further information regarding frequency bands, power levels, antenna posi- tions and installation provisions for the installation of RF-transmitters, is avail- able on request at your Toyota dealer.
Page 10 EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
Page 11 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 12 Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. Indicates operating or working procedures. Follow the steps 1 2 3 in numerical order.
Page 13 How to search Searching by name ■ • Alphabetical index ..P. 359 Searching installation ■ position • Pictorial index....P. 12 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 356 Searching by title ■...
Page 14 Pictorial index Pictorial index ■ Exterior KBAV040101E The shape of the body may differ depending on the grade, etc. Side doors ........P. 86 Locking/unlocking .
Page 15 Pictorial index Wipers........P. 150, 152 Precautions against winter season .
Page 16 Pictorial index ■ Instrument panel (Left-hand drive vehicles) Engine switch ........P. 137 Starting the engine .
Page 17 Pictorial index Multi-information display ......P. 73 Parking brake........P. 145 Applying/releasing .
Page 18 Pictorial index ■ Switches (Left-hand drive vehicles) Outside rear view mirror switches ....P. 111 Rear fog light switch ......P. 148 Window lock switch .
Page 19 Pictorial index Audio remote control switches ..... P. 171 AUX port/USB port ....... P. 172 Power outlets .
Page 20 Pictorial index ■ Interior (Left-hand drive vehicles) SRS airbags ........P. 38 Floor mats .
Page 21 Pictorial index Inside rear view mirror ......P. 110 Sun visors ........P. 204 Interior light /personal lights .
Page 22 Pictorial index ■ Instrument panel (Right-hand drive vehicles) KBAV040203E Engine switch ........P. 137 Starting the engine .
Page 23 Pictorial index Multi-information display ......P. 73 Parking brake........P. 145 Applying/releasing .
Page 24 Pictorial index ■ Switches (Right-hand drive vehicles) KBAV040204E Outside rear view mirror switches....P. 111 VSC off switch ........P. 162 Window lock switch .
Page 25 Pictorial index Audio remote control switches ..... P. 171 KBAV040205E AUX port/USB port ....... P. 172 Power outlets .
Page 26 Pictorial index ■ Interior (Right-hand drive vehicles) SRS airbags ........P. 38 Floor mats .
Page 27 Pictorial index KBAV040206E Inside rear view mirror ......P. 110 Sun visors .
Page 28 Pictorial index AVANZA_OM_General_OMBZ214...
Page 29 For safety and security 1-1. For safe use Before driving.......28 For safe driving ....30 Seat belts......32 SRS airbags......38 Safety information for children......45 Child restraint systems ..46 Installing child restraints ..52 Exhaust gas precautions ..61 1-2. Theft deterrent system Engine immobilizer system .......62 Alarm ........64 AVANZA_OM_General_OMBZ214...
Page 30 1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 31 ■ Do not use floor mats designed for other models or different model year ● vehicles, even if they are Toyota Genuine floor mats. Only use floor mats designed for the driver’s seat. ● Always install the floor mat securely using the retaining hooks (clips) pro- ●...
Page 32 1-1. For safe use For safe driving For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 33 1-1. For safe use WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Do not adjust the position of the driver’s seat while driving. ● Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback.
Page 34 1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 35 1-1. For safe use Fastening the center seat belt of the second seat (if equipped) Take out the plates, and then pull the seat belt. Push the plate into the buckle in Plate “A” Plate “B” the order of plate “A” and plate “B”...
Page 36 1-1. For safe use Releasing and stowing the center seat belt of the second seat (if equipped) To release the hooked plate “B”, push the buckle release button. Plate “B” To release the hooked plate “A”, insert the key into the hole on the buckle.
Page 37 Seat belt regulations ■ If seat belt regulations exist in the country where you reside, please contact your Toyota dealer for seat belt replacement or installation. AVANZA_OM_General_OMBZ214...
Page 38 Each seat belt should be used by one person only. Do not use a seat belt ● for more than one person at once, including children. Toyota recommends that children be seated in the rear seats and always ● use a seat belt and/or an appropriate child restraint system.
Page 39 Ensure that the belt and plate are locked and the belt is not twisted. ● If the seat belt does not function correctly, immediately contact your Toyota dealer. Replace the seat assembly, including the belts, if your vehicle has been ●...
Page 40 1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆...
Page 41 1-1. For safe use SRS airbag system components KBAV110402E Front passenger airbag Seat belt pretensioners and force limiters SRS warning light Front impact sensors Driver airbag Airbag sensor assembly The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. As the airbags deploy, a chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occu- pants.
Page 42 1-1. For safe use WARNING SRS airbag precautions ■ Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. The driver and all passengers in the vehicle must wear their seat belts ●...
Page 43 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 44 Wash off any residue as soon as possible to prevent skin irritation. If the areas where the SRS airbags are stored, such as the steering wheel ● pad, are damaged or cracked, have them replaced by your Toyota dealer. Modification and disposal of SRS airbag system components ■...
Page 45 1-1. For safe use If the SRS airbags deploy (inflate) ■ Slight abrasions, burns, bruising, etc., may be sustained from SRS airbags, ● due to the extremely high speed deployment (inflation) by hot gases. A loud noise and white powder will be emitted. ●...
Page 46 When to contact your Toyota dealer ■ In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or ●...
Page 47 1-1. For safe use Safety information for children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.
Page 48 General installation instructions are provided in this manual. (→P. 52) ● If child restraint system regulations exist in the country where you reside, please contact your Toyota dealer for the child restraint sys- tem installation. ● Toyota recommends that you use a child restraint system which conforms to the regulation ECE No.44.
Page 49 1-1. For safe use Types of child restraints Child restraint systems are classified into the following 5 groups according to the regulation ECE No.44: Group 0: Up to 10 kg (22 lb.) (0 - 9 months) Group 0+: Up to 13 kg (28 lb.) (0 - 2 years) Group I: 9 to 18 kg (20 to 39 lb.) (9 months - 4 years) Group II:...
Page 50 1-1. For safe use Child restraint system suitability for various seating positions Information provided in the table shows your child restraint system suitability for various seating positions. Seating Position Mass Group Front Second Row Third Row Passenger Seat Outboard Center RH/LH up to 10 kg up to 13 kg...
Page 51 1-1. For safe use Child restraint system suitability for various seating positions (with ISOFIX rigid anchors) Information provided in the table shows your child restraint system suitability for various seating positions. Vehicle ISOFIX Position Third Mass Size Front Second Row Fixture Group Class...
Page 52 In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. Toyota strongly urges the use of a proper child restraint system that con- ●...
Page 53 1-1. For safe use WARNING Child restraint precautions ■ Make sure you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of a sudden stop, sudden swerve or an accident.
Page 54 1-1. For safe use Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the outer second seats using a seat belt or ISOFIX rigid anchors. Attach the top strap when installing a child restraint. Seat belts (An ELR belt requires a locking clip) Vehicles with second seats: ISO-...
Page 55 1-1. For safe use Installing child restraints using a seat belt Rear-facing ⎯ Baby seat (infant seat)/child seat (convertible ■ seat) Place the child restraint sys- tem on the seat facing the rear of the vehicle. Run the seat belt through the child restraint system and insert the plate into the buckle.
Page 56 1-1. For safe use Forward-facing ⎯ Child seat (convertible seat) ■ If the head restraint interferes with the child restraint system, remove the head restraint. (→P. 100) Place the child restraint sys- tem on the seat facing the front of the vehicle. STY11AV019 Run the seat belt through the child restraint system and...
Page 57 1-1. For safe use Junior seat (booster seat) ■ If the head restraint interferes with the child restraint system, remove the head restraint. (→P. 100) Place the child restraint sys- tem on the seat facing the front of the vehicle. Sit the child in the child restraint system.
Page 58 1-1. For safe use Installation with ISOFIX rigid anchors (ISOFIX child restraint system) (vehicles with second seats) If the head restraint interferes with the child restraint system, remove the head restraint. (→P. 100) Adjust the second seat at the front most position. (→P. 96) Adjust the seat back to 3rd lock position from the most upright position.
Page 59 Follow the instructions provided by the manufacturer of the system. If your child restraint system does not provide a locking clip, you can purchase the following item from your Toyota dealer: Locking clip for child restraint system (Part No. 73119-22010)
Page 60 1-1. For safe use WARNING When installing a child restraint system ■ Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of a sudden braking, sudden swerving or an accident.
Page 61 1-1. For safe use WARNING When installing a child restraint system ■ Never use a rear-facing child restraint ● system on the front passenger seat. The force of the rapid inflation of the front passenger airbag can cause death or serious injury to children in the event of an accident.
Page 62 ■ If child restraint system regulations exist in the country where you reside, ● please contact your Toyota dealer for the child restraint system installation. When a junior (booster) seat is installed, always ensure that the shoulder ● belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the...
Page 63 Keep the back door closed. ● If you smell exhaust gases in the vehicle even when the back door is ● closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. When parking ■...
Page 64 1-2. Theft deterrent system ∗ Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.
Page 65 1-2. Theft deterrent system Certification for the immobilizer system ■ For vehicles sold in Mexico  Este equipo opera a título secundario, consecuentemente, debe aceptar interferencias perjudiciales incluyendo equipos de la misma clase y puede no causar interferencias a sistemas operando a título primario. For vehicles sold in Jamaica ...
Page 66 1-2. Theft deterrent system ∗ Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked and opened in any way other than using the wireless remote control.
Page 67 1-2. Theft deterrent system Triggering of the alarm ■ The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.) The doors are unlocked and opened ● using the key. A person inside the vehicle opens a door ●...
Page 68 1-2. Theft deterrent system AVANZA_OM_General_OMBZ214...
Page 69 Instrument cluster Instrument cluster Warning lights and indicators ......68 Gauges and meters .....72 Multi-information display ..73 AVANZA_OM_General_OMBZ214...
Page 70 2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated. KBAV210101E Warning lights Warning lights inform the driver of malfunctions in the indicated vehi-...
Page 71 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : If equipped : The light illuminate on the center panel.
Page 72 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light flashes to indicate that the system is operating.
Page 73 Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.
Page 74 2. Instrument cluster Gauges and meters Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Multi-information display Presents the driver with a variety of driving-related data. (→P. 73) Display change button →P. 73 Clock adjust button →P.
Page 75 2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving-related data including the clock. Display contents Fuel gauge Clock (→P. 75) Shift position (If equipped) (→P. 140) Drive information (→P. 74) Changing the display Items displayed can be switched by pressing the display change button.
Page 76 2. Instrument cluster Drive information Odometer ■ Displays the total distance the vehicle has been driven. Trip meter ■ Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and dis- play different distances independently.
Page 77 2. Instrument cluster Clock The clock can be adjusted by clock adjust button. Rounding to the nearest hour ■ To enter adjustment mode, press and hold the clock adjust but- ton until the minute and hour indication flashes. Press and hold the clock adjust button then release the button. The minute values will be rounded to the nearest hour.
Page 78 2. Instrument cluster When disconnecting and reconnecting battery terminals ■ The following information data will be reset: Average fuel consumption ● Driving range ● Clock data ● Liquid crystal display ■ Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal display, and there is no problem continuing to use the display.
Page 79 Operation of each component 3-1. Key information Keys........78 3-2. Opening, closing and locking the doors Side doors......86 Back door......90 3-3. Adjusting the seats Front seats......94 Rear seats ......96 Head restraints ....100 Seat arrangement ....103 3-4. Adjusting the steering wheel and mirrors Steering wheel ....108 Inside rear view mirror ..110 Outside rear view mirrors...111...
Page 80 3-1. Key information Keys The keys The following keys are provided with the vehicle. Type A  Keys Key number plate Type B  Key (with wireless remote con- trol function) Operating the wireless remote con- trol function (→P. 86) Key (without wireless remote control function) Key number plate...
Page 81 3-1. Key information Type D  Keys Operating the wireless remote con- trol function (→P. 86) Key number plate Type E  Keys Wireless remote controls Operating the wireless remote control function (→P. 86) Key number plate Wireless remote control (if equipped) Type B, C, D Type E ...
Page 82 If you lose your keys ■ New genuine keys can be made by your Toyota dealer using the other key and the key number stamped on your key number plate. Keep the plate in a safe place such as your wallet, not in the vehicle.
Page 83 3-1. Key information For vehicles sold in Guinea Bissau, Tahiti and Honduras  AVANZA_OM_General_OMBZ214...
Page 84 3-1. Key information For vehicles sold in Nigeria  For vehicles sold in Jordan  For vehicles sold in U.A.E.  For vehicles sold in Oman  For vehicles sold in Jamaica  For vehicles sold in Zambia  For vehicles sold in South Africa ...
Page 85 3-1. Key information For vehicles sold in Vietnam  For vehicles sold in Pakistan  For vehicles sold in Mexico  AVANZA_OM_General_OMBZ214...
Page 86 3-1. Key information For vehicles sold in Paraguay  AVANZA_OM_General_OMBZ214...
Page 87 3-1. Key information For vehicles sold in Samoa  NOTICE To prevent key damage ■ Do not drop the keys, subject them to strong shocks or bend them. ● Do not expose the keys to high temperatures for long periods of time. ●...
Page 88 3-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the wireless remote control (if equipped) or key. Unlocking and locking the doors from the outside ◆ Wireless remote control (if equipped) Type A Type B ...
Page 89 3-2. Opening, closing and locking the doors Vehicles with a power door lock system  Locks all the doors Unlocks all the doors The front passenger’s door key cylinder locks or unlocks only front passenger’s door. Operation signals ■ A buzzer (if equipped) sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked using the wireless remote control.
Page 90 3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Inside lock knobs Locks the door Unlocks the door Vehicles with a power door lock system: Operating the inside lock knob on the driver’s door will lock or unlock all the doors.
Page 91 3-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Lock Unlock These locks can be set to prevent children from opening the rear doors. Move the lever on each rear door switch to lock both rear doors.
Page 92 3-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the fol- lowing procedures. Locking and unlocking the back door ◆ Wireless remote control (if equipped) →P. 86 ◆ Keys From the back door: Locks the door Unlocks the door From the driver’s door: →P.
Page 93 3-2. Opening, closing and locking the doors Opening the back door Raise the back door while pulling up the back door outside handle. Operation signals (vehicles with a wireless remote control) ■ →P. 87 Security feature (vehicles with a wireless remote control) ■...
Page 94 If a bicycle carrier or similar heavy object is attached to the back door, it ● may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. AVANZA_OM_General_OMBZ214...
Page 95 Do not touch the damper stay rod with ● gloves or other fabric items. Do not attach any accessories other ● than genuine Toyota parts to the back door. Do not place your hand on the damper ● stay or apply lateral forces to it.
Page 96 3-3. Adjusting the seats Front seats Adjustment procedure Seat position adjustment lever Seatback angle adjustment lever AVANZA_OM_General_OMBZ214...
Page 97 3-3. Adjusting the seats WARNING When adjusting the seat position ■ Take care when adjusting the seat position to ensure that other passen- ● gers are not injured by the moving seat. Do not put your hands under the seat or near the moving parts to avoid ●...
Page 98 3-3. Adjusting the seats ∗ Rear seats Adjustment procedure Second seats  Seat position adjustment lever Seatback angle adjustment lever ∗ : If equipped AVANZA_OM_General_OMBZ214...
Page 99 3-3. Adjusting the seats Third seats  Seatback lock release lever AVANZA_OM_General_OMBZ214...
Page 100 3-3. Adjusting the seats When getting in and out of the vehicle from the third seats Stow the seat belt buckles of the second seat as shown. Lower the head restraints to the lowest position. Pull the seatback angle adjust- ment lever and fold the seat- back down.
Page 101 3-3. Adjusting the seats WARNING When folding the rear seats ■ Observe the following precautions. Failure to do so may result in death or serious injury. Do not fold the seats while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift ●...
Page 102 3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Adjusting the head restraints Except for second center seat Second center seat   Lock release button Lock release button Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Removing the head restraints ■...
Page 103 3-3. Adjusting the seats Installing the head restraints ■ Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Except for second center Second center seat ...
Page 104 3-3. Adjusting the seats WARNING Head restraint precautions ■ Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. Use the head restraints designed for each respective seat. ● Adjust the head restraints to the correct position at all times. ●...
Page 105 3-3. Adjusting the seats ∗ Seat arrangement ◆ Expanding luggage space Tumbling the third seats (→P. 104) ◆ Flattening the seats Flattening the front seats and second seats (→P. 106) ∗ : If equipped AVANZA_OM_General_OMBZ214...
Page 106 3-3. Adjusting the seats Tumbling the third seats Stow the seat belt buckles as shown. Lower the head restraints to the lowest position. Pull the seatback lock release lever and fold the seatback down. Pull the seat lock release lever and swing the whole seat up and forward.
Page 107 3-3. Adjusting the seats Stow the leg. Unfasten hook-and-loop fastener. Hook the holding strap to the head restraint and secure the seat by pulling its free end. When returning the third seats to its original position, stow the holding strap securely. AVANZA_OM_General_OMBZ214...
Page 108 3-3. Adjusting the seats Flattening the front seats and second seats Make sure to stop the vehicle and set the parking brake. Slide the second seats to the rear most position. (→P. 96) Remove the head restraints from the front seats. (→P. 100) Slide the front seats to the front most position.
Page 109 3-3. Adjusting the seats WARNING Seat arrangement ■ Observe the following precautions. Failure to do so may result in death or serious injury. Do not arrange the seat positions while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift ●...
Page 110 3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure (vehicles with a tilt steering wheel) Hold the steering wheel and push the lever down. KBAV340101E Adjust to the ideal position by moving the steering wheel. After adjustment, pull the lever up to secure the steering wheel.
Page 111 3-4. Adjusting the steering wheel and mirrors WARNING Caution while driving ■ Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. After adjusting the steering wheel ■...
Page 112 3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Anti-glare function (if equipped) Reflected light from the headlights of vehicles behind can be reduced by operating the lever.
Page 113 3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure Manually-adjustable type  Adjust the mirror up, down, in or out by moving the mirror assem- bly. KBAV340301E Power-adjustable type  To select a mirror to adjust, press the switch.
Page 114 3-4. Adjusting the steering wheel and mirrors Folding the mirrors Manual type  Push the mirror back in the direc- tion of the vehicle’s rear. KBAV340304E Power type  Press the button to fold back the mirrors. Push once more to return to the original position.
Page 115 3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing (driver’s win- dow only) Opening One-touch opening (driver’s window only) : To stop the window partway, oper-...
Page 116 If you release the switch while the window is moving, start again from the beginning. If the window re-opens slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. If the battery is disconnected ■...
Page 117 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Closing the windows ■ The driver is responsible for all the power window operations, including the ● operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
Page 118 3-5. Opening and closing the windows AVANZA_OM_General_OMBZ214...
Page 119 Opening the fuel tank cap........154 Cargo and luggage ....127 4-5. Using the driving support Trailer towing systems (except for South Africa)...128 Toyota parking Trailer towing assist-sensor ....157 (for South Africa) ....129 Driving assist systems ..161 4-2. Driving procedures 4-6. Driving tips Engine (ignition) switch ..137...
Page 120 4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine →P. 137 Driving Vehicles with an automatic transmission  With the brake pedal depressed, shift the shift lever to D. (→P. 140) Release the parking brake.
Page 121 4-1. Before driving Parking the vehicle Vehicles with an automatic transmission  With the shift lever in D, depress the brake pedal. Set the parking brake (→P. 145), and shift the shift lever to P (→P. 140). Turn the engine switch to the “LOCK” position to stop the engine. Lock the door, making sure that you have the key on your person.
Page 122 The vehicle is judged to be driving uphill or downhill ● When the accelerator pedal is released ● Breaking in your new Toyota ■ To extend the life of the vehicle, observing the following precautions is recom- mended: For the first 300 km (186 miles): ●...
Page 123 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When starting the vehicle (vehicles with an automatic transmission) ■ Always keep your foot on the brake pedal while stopped with the engine running.
Page 124 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When driving on slippery road surfaces ■ Sudden braking, acceleration and steering may cause tire slippage and ● reduce your ability to control the vehicle. Sudden acceleration, engine braking due to shifting, or changes in engine ●...
Page 125 If you hear a squealing or scraping noise (brake pad wear indicators) ■ Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 126 4-1. Before driving WARNING Do not attach adhesive discs to the windshield or windows. Do not place ● containers such as air fresheners on the instrument panel or dashboard. Adhesive discs or containers may act as lenses, causing a fire in the vehi- cle.
Page 127 4-1. Before driving NOTICE When driving the vehicle ■ Vehicles with an automatic transmission  Do not depress the accelerator and brake pedals at the same time during ● driving, as this may restrain the engine output. Do not use the accelerator pedal or depress the accelerator and brake ●...
Page 128 Engine damage caused by water immersion ● In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: Brake function ● Changes in quantity and quality of engine oil, transmission fluid, differen- ●...
Page 129 4-1. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load: WARNING Things that must not be carried in the luggage compartment ■ The following things may cause a fire if loaded in the luggage compartment: Receptacles containing gasoline ●...
Page 130 Trailer towing (except for South Africa) Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc.
Page 131 MPAC (Maximum Permissible Axle Capacity), and permissible drawbar load before towing. (→P. 338) ◆ Towing hitch/bracket Toyota recommends the use of the Toyota hitch/bracket for your vehicle. Other products of a suitable nature and comparable quality may also be used. AVANZA_OM_General_OMBZ214...
Page 132 4-1. Before driving Important points regarding trailer loads Total trailer weight and permissible drawbar load ■ Total trailer weight Weight of the trailer itself plus the trailer load should be within the maximum towing capacity. Exceeding this weight is dangerous. (→P.
Page 133 4-1. Before driving Information tag (manufacturer’s plate) ■ Gross vehicle mass Maximum permissible rear axle capacity KBAV410302E Gross vehicle mass ■ The combined weight of the driver, passengers, luggage, towing hitch, total curb mass and drawbar load should not exceed the gross vehicle mass by more than 100 kg (220.5 lb.).
Page 134 4-1. Before driving Installation positions* for the towing hitch/bracket and hitch ball Total trailer weight and permissible drawbar load ■ 45 mm (1.8 in.) 354 mm (13.9 in.) 497 mm (19.6 in.) 502 mm (19.8 in.) KBAV410303E 915 mm (36.0 in.) 687 mm (27.0 in.) 525 mm (20.7 in.) 376 mm (14.8 in.)
Page 135 Break-in schedule ■ Toyota recommends that vehicles fitted with new power train components should not be used for towing trailers for the first 800 km (500 miles). Safety checks before towing ■...
Page 136 4-1. Before driving Guidance Your vehicle will handle differently when towing a trailer. In order to avoid accident, death or serious injury, keep the following in mind when towing: Checking connections between trailer and lights ■ Stop the vehicle and check the operation of the connection between the trailer and lights after driving for a brief period as well as before starting off.
Page 137 4-1. Before driving Important points regarding stability ■ Vehicle movement resulting from uneven road surfaces and strong crosswinds will affect handling. The vehicle may also be rocked by passing buses or large trucks. Frequently check behind when mov- ing alongside such vehicles. As soon as such vehicle movement occurs, immediately start to decelerate smoothly by slowly applying the brakes.
Page 138 4-1. Before driving WARNING Follow all the instructions described in this section. Failure to do so could cause an accident resulting in death or serious injury. Trailer towing precautions ■ When towing, make sure that none of the weight limits are exceeded. (→P.
Page 139 4-2. Driving procedures Engine (ignition) switch Starting the engine Vehicles with an automatic transmission  Check that the parking brake is set. Check that the shift lever is set in P. Firmly depress the brake pedal. Turn the engine switch to the “START” position to start the engine. Vehicles with a manual transmission ...
Page 140 If the engine does not start (vehicles with an engine immobilizer system) ■ The engine immobilizer system may not have been deactivated. (→P. 62) Contact your Toyota dealer. When the steering lock cannot be released ■ When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 141 Do not crank the engine for more than 30 seconds at a time. This may ● overheat the starter and wiring system. Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- ● cle checked by your Toyota dealer immediately. AVANZA_OM_General_OMBZ214...
Page 142 4-2. Driving procedures ∗ Automatic transmission Shifting the shift lever KBAV420201E While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Page 143 If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 144 4-2. Driving procedures ∗ Manual transmission Shifting the shift lever KBAV420301E Fully depress the clutch pedal before operating the shift lever, and then release it slowly. If it is difficult to shift in reverse, shift the shift lever to N, release the clutch pedal momentarily, and then try again.
Page 145 4-2. Driving procedures Maximum downshifting speed ■ Observe the downshifting speeds in the following table to prevent over-rev- ving the engine. km/h (mph) Maximum speed Shift position 2NR-VE engine 1NR-VE engine 185/70R14 tires 185/65R15 tires 38 (23) 40 (24) 36 (22) 36 (22) 70 (43) 74 (46)
Page 146 4-2. Driving procedures Turn signal lever Operation instructions Right turn Right turn signal will blink con- tinuously while the lever is kept position Right turn signal will blink three times, when the lever is pushed to position and released immedi- ately.
Page 147 4-2. Driving procedures Parking brake Operation instructions To set the parking brake, fully pull the parking brake lever while depressing the brake pedal. To release the parking brake, slightly raise the lever and lower it completely while press- ing the button. KBAV420101E Parking the vehicle ■...
Page 148 4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. Operation instructions Operating the switch turns on the lights as follows: The front position, tail, license plate and instru- ment panel lights turn on. The headlights and all the lights listed above turn on.
Page 149 4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
Page 150 4-3. Operating the lights and wipers ∗ Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. Operation instructions Front fog light switch  Turns the front fog lights Turns the front fog lights Rear fog light switch ...
Page 151 4-3. Operating the lights and wipers Fog lights can be used when ■ Vehicles with front fog light switch  The headlights or the front position lights are turned on. Vehicles with front and rear fog light switch  Front fog lights: The headlights or the front position lights are turned on. Rear fog light: The front fog lights are turned on.
Page 152 4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Operating the lever operates the wipers as follows: Intermittent windshield wiper operation The intermittent windshield wiper operates more fre- quently as vehicle speed becomes higher. speed windshield wiper operation High...
Page 153 Do not operate the switch continually as the washer fluid pump may over- heat. When a nozzle becomes blocked ■ In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. To prevent battery discharge ■...
Page 154 4-3. Operating the lights and wipers ∗ Rear window wiper and washer Operation instructions Operating the switch operates the rear wiper or washer as fol- lows: Intermittent window wiper operation operates Intermittently, after automatically operating times. Normal window wiper operation Washer/wiper dual oper- ation Pushing the lever operates the...
Page 155 Do not operate the switch continually as the washer fluid pump may over- heat. When a nozzle becomes blocked ■ In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. To prevent battery discharge ■...
Page 156 4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Turn the engine switch to the “LOCK” position, and ensure that all the doors and windows are closed. ●...
Page 157 4-4. Refueling WARNING When refueling the vehicle ■ Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. After exiting the vehicle and before opening the fuel door, touch an ● unpainted metal surface to discharge any static electricity.
Page 158 WARNING When replacing the fuel tank cap ■ Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 159 Always check the surrounding area when using this system. Back sensors ■ KBAV450104E Toyota parking assist-sensor operation ■ When the shift lever is in R, the indicator will flash or come on. The buzzer will also sounds to inform the driver.
Page 160 4-5. Using the driving support systems The indicator and buzzer When a sensor detects an obstacle, the approximate distance to the obstacle is indicated and the buzzer sounds. Sensor operation and distance to an obstacle ■ The system operates when the vehicle approaches an obstacle, as shown by the following table.
Page 161 • The vehicle is approaching a tall or right-angled curb. • In harsh sunlight or intense cold weather. • A non-genuine Toyota suspension (lowered suspension, etc.) is installed. • When attaching a two-way radio antenna. • A backlit license plate, license plate holder, etc., are installed.
Page 162 4-5. Using the driving support systems WARNING Caution when using the Toyota parking assist-sensor ■ Observe the following precautions. Failing to do so may result in the vehicle being unable to be driven safely and possibly cause an accident. Do not use the sensor at speeds in excess of 10 km/h (6 mph).
Page 163 4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.
Page 164 When the “TRC OFF” indicator comes on even if the VSC off switch has ■ not been pressed TRC cannot be operated. Contact your Toyota dealer. Sounds and vibrations caused by the ABS, brake assist, TRC and VSC ■ systems A sound may be heard from the engine compartment when the brake pedal ●...
Page 165 The EPS system should return to normal within 10 minutes. If the slip indicator comes on ■ It may indicate a malfunction in the systems. Contact your Toyota dealer. AVANZA_OM_General_OMBZ214...
Page 166 The ABS , TRC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and the suspension ■...
Page 167 4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 168 Repairing or replacing snow tires (vehicles with the tire pressure warn- ■ ing system) Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 169 4-6. Driving tips Eco-friendly driving tips For improved fuel economy and reduced CO2 emissions, pay attention to the following points: ◆ Use of Eco Driving Indicator Eco-friendly driving is possible by maintaining the Eco Driving Indi- cator, shown in the meter, in the on state. (→P. 120) ◆...
Page 170 4-6. Driving tips ◆ Air conditioning Use the air conditioning only when necessary. Doing so can help reduce excessive fuel consumption. In summer: When the ambient temperature is high, use the recircu- lated air mode. Doing so will help to reduce the burden on the air conditioning system and reduce fuel consumption as well.
Page 171 Audio system 5-1. Basic Operations Audio system types....170 Steering wheel audio switches......171 AUX port/USB port.....172 5-2. Using the audio system Optimal use of the audio system ......173 5-3. Using the radio Radio operation ....174 5-4. Playing audio CDs and MP3/WMA discs CD player operation...176 AVANZA_OM_General_OMBZ214...
Page 172 5-1. Basic Operations ∗ Audio system types Using cellular phones ■ Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. NOTICE To prevent battery discharge ■...
Page 173 5-1. Basic Operations ∗ Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system. For details, refer to the manual provided with the audio system. Operating the audio system using the steering wheel switches Volume switch: •...
Page 174 5-1. Basic Operations ∗ AUX port/USB port Connect an iPod, USB memory device or portable audio player to the AUX port/USB port as indicated below. Operation may differ depending on the type of audio system. For details, refer to the manual provided with the audio system. Connecting using the AUX port/USB port iPod ■...
Page 175 5-2. Using the audio system ∗ Optimal use of the audio system Sound quality (treble/bass) and volume balance can be adjusted. Displays the current mode Changes the following setting • Sound quality and volume bal- ance (→P. 173) The sound quality and balance set- ting can be changed to produce the best sound.
Page 176 5-3. Using the radio ∗ Radio operation Select “AM” or “FM” to begin listening to the radio. Adjusting the frequency/Seek- AM/FM mode button ing frequency Scanning for receivable sta- Power tions Volume Station selector ∗ : If equipped AVANZA_OM_General_OMBZ214...
Page 177 5-3. Using the radio Setting station presets Search for desired stations by pressing on “TRACK TUNE”. Press and hold the button (from ) the station is to be set to until you hear a beep. Scanning radio stations Scanning the preset radio stations ■...
Page 178 5-4. Playing audio CDs and MP3/WMA discs ∗ CD player operation Insert a disc or press to beginning to a disc. Selecting a folder Playback Selecting a track Fast-forwarding Search playback Reversing Power CD selection Volume Repeat play CD eject Random playback ∗...
Page 179 5-4. Playing audio CDs and MP3/WMA discs Loading CDs or MP3 and WMA discs Insert a disc. Ejecting CDs or MP3 and WMA discs Press and remove the disc. Using the CD player ◆ Selecting and scanning a track Selecting a track ■...
Page 180 5-4. Playing audio CDs and MP3/WMA discs ◆ Selecting a CD Selecting the desired CD ■ Press Scanning loaded CDs ■ Press and hold until you hear a beep. The first 10 seconds of the first track on each CD will be played. Press the switch again when the desired CD is reached.
Page 181 5-4. Playing audio CDs and MP3/WMA discs Playing back MP3 and WMA discs ◆ Selecting and scanning folders Selecting folders one at a time ■ To select the desired folder, press on “FOLDER”. To return to the first folder, press and hold on “FOLDER”...
Page 182 5-4. Playing audio CDs and MP3/WMA discs ◆ Selecting and scanning files Selecting one file at a time ■ To select the desired file, press on “TRACK TUNE”. Scanning the desired file by cueing the files in the folder ■ Press The first 10 seconds of all files in the folder will be played.
Page 183 Error messages ■ If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause Correction procedures • The disc is dirty or damaged.
Page 184 5-4. Playing audio CDs and MP3/WMA discs Discs that can be used ■ Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration. CDs with copy-protect features may not be used.
Page 185 5-4. Playing audio CDs and MP3/WMA discs WMA file compatibility ● • Compatible standards WMA Ver. 7, 8, 9 (incompatible with DRM) • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver.
Page 186 5-4. Playing audio CDs and MP3/WMA discs ID3 and WMA tags ● ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 187 5-4. Playing audio CDs and MP3/WMA discs NOTICE Discs and adapters that cannot be used ■ Do not use the following types of discs. Also, do not use 8 cm (3 in.) disc adapters, Dual Discs or printable discs. Doing so may damage the player and/or the disc insert/eject function. Discs that have a diameter that is not 8 cm (3 in.) or 12 cm (4.7 in.) ●...
Page 188 5-4. Playing audio CDs and MP3/WMA discs AVANZA_OM_General_OMBZ214...
Page 189 Interior features 6-1. Using the air conditioning system and defogger Front air conditioning system ......188 Rear cooler system....195 6-2. Using the interior lights Interior lights list....197 • Interior lights....198 • Personal lights....199 6-3. Using the storage features List of storage features ..200 •...
Page 190 6-1. Using the air conditioning system and defogger Front air conditioning system Air conditioning controls Type A  Type B  AVANZA_OM_General_OMBZ214...
Page 191 6-1. Using the air conditioning system and defogger Adjusting the temperature settings (type A only) ■ Press ▲(increase) or ▼ (decrease). If the “A/C” button is not pressed, the system will blow ambient tempera- ture air or heated air. For quick cooling, press the “MAX COOL” button.(if equipped) Adjusting the cooler settings (type B only) ■...
Page 192 6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time the button is pressed. Defogging the windshield (type A only) ■...
Page 193 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ Type A  The air outlets and air volume change according selected airflow mode. KBAV610105E Type B  KBAV610102E AVANZA_OM_General_OMBZ214...
Page 194 6-1. Using the air conditioning system and defogger Adjusting the position of the air outlets ■ Front center outlets  Direct air flow to the left or right, up or down. KBAV610103E Front side outlets  Direct air flow to the left or right, up or down.
Page 195 6-1. Using the air conditioning system and defogger Fogging up of the windows ■ The windows will easily fog up when the humidity in the vehicle is high. ● Turning “A/C” button on will flow the dehumidified air from the outlets and defog the windshield effectively.
Page 196 6-1. Using the air conditioning system and defogger NOTICE To prevent battery discharge ■ Do not leave the air conditioning system and/or rear window defogger (if equipped) on longer than necessary when the engine is stopped. AVANZA_OM_General_OMBZ214...
Page 197 6-1. Using the air conditioning system and defogger ∗ Rear cooler system Type A  KBAV610201E Type B  Front fan speed control button Rear fan speed control lever ∗ : If equipped AVANZA_OM_General_OMBZ214...
Page 198 6-1. Using the air conditioning system and defogger Using the rear cooler system Turn on the fan of the front air conditioning system. Adjusting the fan speed To adjust the fan speed, slide the rear fan speed control lever the right (increase) or the left (decrease).
Page 199 6-2. Using the interior lights Interior lights list KBAV620101E Front interior light (→P. 198) Personal lights (if equipped) (→P. 199) Rear interior light (→P. 198) AVANZA_OM_General_OMBZ214...
Page 200 6-2. Using the interior lights Interior lights Front (type A) ■ Turns the light on Turns the light on/off linked to door position Turns the light off Front (type B) ■ Turns the light on/off linked to door position Turns the light off Rear ■...
Page 201 6-2. Using the interior lights Personal lights (if equipped) Turns the lights on/off Illuminated entry system ■ The lights turn on/off automatically with the opening/closing of the doors. To prevent battery from being discharged ■ If the interior light remains on in the following conditions, the light will go off ●...
Page 202 6-3. Using the storage features List of storage features KBAV630101E Glove box (→P. 201) Auxiliary box (if equipped) (→P. 203) Bottle holders (→P. 201) WARNING Do not leave glasses, lighters or spray cans in the storage spaces, as this ● may cause the following when cabin temperature becomes high: •...
Page 203 6-3. Using the storage features Glove box Pull up the lever to open the glove box. KBAV630102E Bottle holders Front ■ AVANZA_OM_General_OMBZ214...
Page 204 6-3. Using the storage features Rear ■ Type A Type B   Type C (if equipped) Type D (if equipped)   When using the bottle holders ■ When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. ●...
Page 205 6-3. Using the storage features Auxiliary box (if equipped) Press the lid. This box is useful for temporarily storing sunglasses and similar small items. WARNING Do not store items heavier than 0.2 kg (0.4 lb.). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident.
Page 206 6-4. Other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Power outlets Front ■...
Page 207 6-4. Other interior features The power outlets can be used when ■ The engine switch is in the “ACC” or “ON” position. When turning the engine switch off ■ Disconnect electrical devices with charging functions, such as mobile battery packs. If such devices are left connected, the engine switch may not be turned off normally.
Page 208 6-4. Other interior features AVANZA_OM_General_OMBZ214...
Page 209 Maintenance and care 7-1. Maintenance and care 7-3. Do-it-yourself maintenance Cleaning and protecting Do-it-yourself service the vehicle exterior ..208 precautions ......242 Cleaning and protecting Hood ........244 the vehicle interior ...211 Positioning a floor jack..246 7-2. Maintenance Engine compartment..247 Maintenance Tires........260 requirements....214 Tire inflation pressure ..268 Scheduled maintenance ..217...
Page 210 7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 211 7-1. Maintenance and care Aluminum wheels (if equipped) ■ Remove any dirt immediately by using a neutral detergent. ● Wash detergent off with water immediately after use. ● To protect the paint from damage, make sure to observe the following pre- ●...
Page 212 7-1. Maintenance and care NOTICE To prevent paint deterioration and corrosion on the body and compo- ■ nents (aluminum wheels, etc.) Wash the vehicle immediately in the following cases: ● • After driving near the sea coast • After driving on salted roads •...
Page 213 7-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 214 7-1. Maintenance and care Caring for leather areas ■ Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Shampooing the carpets ■ There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 215 7-1. Maintenance and care NOTICE Cleaning detergents ■ Do not use the following types of detergent, as they may discolor the vehi- ● cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 216 ● Where to go for maintenance service? It makes good sense to take your vehicle to your local Toyota dealer for maintenance service as well as other inspections and repairs. Toyota technicians are well-trained specialists receiving the latest service information through technical bulletins, service tips and in-dealership train- ing programs.
Page 217 Engine coolant temperature continually higher than normal ● If you notice any of these clues, take your vehicle to your Toyota dealer as soon as possible. Your vehicle may need adjustment or repair. AVANZA_OM_General_OMBZ214...
Page 218 7-2. Maintenance WARNING If your vehicle is not properly maintained ■ Improper maintenance could result in serious damage to the vehicle and possible death or serious injury. Handling of the battery ■ Battery posts, terminals and related accessories contain lead and lead com- pounds which are known to cause brain damage.
Page 219 7-2. Maintenance Scheduled maintenance Perform maintenance by the schedule as follows: Maintenance schedule requirements Your vehicle needs to be serviced in according to the normal maintenance schedule. (See “Maintenance schedule”.) If you mainly operate your vehicle under one or more of the spe- cial operating conditions below, some of the maintenance sched- ule items need to be serviced more frequently in order to keep your vehicle in good condition.
Page 220 7-2. Maintenance Maintenance schedule (except for South Africa and Mexico) Maintenance operations: I = Inspect, correct or replace as necessary; R = Replace, change or lubricate SERVICE ODOMETER READING INTERVAL: (Odometer x1000 MONTHS 10 20 30 40 50 60 70 80 reading or months, x1000...
Page 221 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary; R = Replace, change or lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 MONTHS 10 20 30 40 50 60 70 80 reading or months, x1000 whichever...
Page 222 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary; R = Replace, change or lubricate SERVICE ODOMETER READING INTERVAL: (Odometer x1000 MONTHS 10 20 30 40 50 60 70 80 reading or months, x1000 whichever 12 18 24 30 36 42 48 miles comes first.) CHASSIS AND BODY...
Page 223 7-2. Maintenance Additional maintenance schedule (except for South Africa and Mexico) Refer to the following table for normal maintenance schedule items requiring more frequent service specific to the type of severe condi- tions. (For outline, see “Maintenance schedule requirements”.) A-1: Operating on rough or muddy roads, or roads with melted snow ...
Page 224 7-2. Maintenance A-2: Operating on dusty roads (Roads in areas where their pavement rate is low, or a cloud of dust often arises and the air is dry.) Every 5000 km (3000 miles) or  Replacement of engine oil 3 months Every 5000 km (3000 miles) or ...
Page 225 7-2. Maintenance B-1: Heavily loaded vehicle (Example: Using a car top carrier, etc.) Every 5000 km (3000 miles) or  Replacement of engine oil 3 months Every 5000 km (3000 miles) or  Replacement of engine oil filter 3 months ...
Page 226 7-2. Maintenance B-3: Extensive idling and/or low speed driving for a long distance such as police, professional/private use like taxi or door-to-door delivery use Every 5000 km (3000 miles) or  Replacement of engine oil 3 months Every 5000 km (3000 miles) or ...
Page 227 7-2. Maintenance Maintenance schedule (for South Africa) Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km MONTHS reading or months, whichever x1000 comes first.) miles BASIC ENGINE COMPONENTS Drive belts Engine oil Engine oil filter...
Page 228 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km MONTHS reading or months, whichever x1000 comes first.) miles CHASSIS AND BODY Clutch pedal (1NR-VE engine)
Page 229 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km MONTHS reading or months, whichever x1000 comes first.) miles CHASSIS AND BODY I: 48 Manual transmission oil R: 96 Automatic transmission I: 36...
Page 230 7-2. Maintenance Additional maintenance schedule (for South Africa) Refer to the following table for normal maintenance schedule items requiring more frequent service specific to the type of severe condi- tions. (For outline, see “Maintenance schedule requirements”.) A-1: Operating on rough or muddy roads, or roads with melted snow ...
Page 231 7-2. Maintenance A-2: Operating on dusty roads (Roads in areas where their pavement rate is low, or a cloud of dust often arises and the air is dry.) Every 7500 km (4500 miles) or  Replacement of engine oil 6 months Every 7500 km (4500 miles) or ...
Page 232 7-2. Maintenance B-1: Heavily loaded vehicle (Example: Towing a trailer (vehicles sold in South Africa), using a car top carrier, etc.) Every 7500 km (4500 miles) or  Replacement of engine oil 6 months Every 7500 km (4500 miles) or ...
Page 233 7-2. Maintenance B-3:Extensive idling and/or low speed driving for a long distance such as police, professional/private use like taxi or door-to-door delivery use Every 7500 km (4500 miles) or  Replacement of engine oil 6 months Every 7500 km (4500 miles) or ...
Page 234 7-2. Maintenance Maintenance schedule (For Mexico) Maintenance operations: I = Inspect, correct or replace as necessary; R = Replace, change or lubricate SERVICE ODOMETER READING INTERVAL: (Odometer x1000 MONTHS 10 20 30 40 50 60 70 80 reading or months, x1000 whichever 12 18 24 30 36 42 48...
Page 235 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary; R = Replace, change or lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 MONTHS 10 20 30 40 50 60 70 80 reading or months, x1000 whichever...
Page 236 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary; R = Replace, change or lubricate SERVICE ODOMETER READING INTERVAL: (Odometer x1000 MONTHS 10 20 30 40 50 60 70 80 reading or months, x1000 whichever 12 18 24 30 36 42 48 miles comes first.) CHASSIS AND BODY...
Page 237 7-2. Maintenance Additional maintenance schedule (For Mexico) Refer to the following table for normal maintenance schedule items requiring more frequent service specific to the type of severe condi- tions. (For outline, see “Maintenance schedule requirements”.) A-1: Operating on rough or muddy roads, or roads with melted snow ...
Page 238 7-2. Maintenance A-2: Operating on dusty roads (Roads in areas where their pavement rate is low, or a cloud of dust often arises and the air is dry.) Every 5000 km (3000 miles) or  Replacement of engine oil 3 months Every 5000 km (3000 miles) or ...
Page 239 7-2. Maintenance B-1: Heavily loaded vehicle (Example: Using a camper, using a car top car- rier, etc.) Every 5000 km (3000 miles) or  Replacement of engine oil 3 months Every 5000 km (3000 miles) or  Replacement of engine oil filter 6 months ...
Page 240 7-2. Maintenance B-3: Extensive idling and/or low speed driving for a long distance such as police, professional/private use like taxi or door-to-door delivery use Every 5000 km (3000 miles) or  Replacement of engine oil 3 months Every 5000 km (3000 miles) or ...
Page 241 Listed below are the general maintenance items that should be performed at the intervals specified. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items...
Page 242 7-2. Maintenance Items Check points • The vehicle should not pull to one side when the brakes are applied. • The brakes should work effectively. Brakes • The brake pedal should not feel spongy. • The brake pedal should not get too close to the floor when the brakes are applied.
Page 243 7-2. Maintenance Items Check points • Is the tire inflation pressure correct? • The tires should not be damaged or excessively worn. Tire • Have the tires been rotated according to the maintenance schedule? • The wheel nuts should not be loose. •...
Page 244 Brake fluid level • Rag or paper towel (→P. 252) • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- Engine coolant life hybrid organic acid technology level (→P.
Page 245 7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. When working on the engine compartment ■ Keep hands, clothing and tools away from the moving fan and engine ●...
Page 246 7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release knob. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by inserting the supporting rod into the slot.
Page 247 7-3. Do-it-yourself maintenance WARNING Pre-driving check ■ Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. When opening the hood ■...
Page 248 7-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safety. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
Page 249 7-3. Do-it-yourself maintenance Engine compartment KBAV730401E Fuse box (→P. 277) Washer fluid tank (→P. 257) Engine oil level dipstick Engine coolant reservoir (→P. 248) (→P. 250) Air cleaner (→P. 258) Radiator (→P. 252) Engine oil filler cap Condenser (→P. 252) (→P.
Page 250 7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 251 7-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 252 Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. Do not leave used engine oil within the reach of children.
Page 253 ■ Visually check the radiator, hoses, engine coolant reservoir cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. WARNING When the engine is hot ■...
Page 254 Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING When the engine is hot ■...
Page 255 7-3. Do-it-yourself maintenance Brake fluid can absorb moisture from the air ■ Excess moisture in the brake fluid can cause a dangerous loss of braking effi- ciency. Use only newly opened brake fluid. WARNING When filling the reservoir ■ Take care as brake fluid can harm your hands and eyes and damage painted surfaces.
Page 256 7-3. Do-it-yourself maintenance Battery exterior ■ Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp Checking battery fluid ■ Check that the level is between “UPPER LEVEL”...
Page 257 7-3. Do-it-yourself maintenance 1NR-VE engine  Remove the battery cover as shown in the illustration. Remove the vent plug. Add distilled water. If the “UPPER LEVEL” line cannot be seen, check the fluid level by looking directly at the cell. Put the vent plug back on and close it securely.
Page 258 7-3. Do-it-yourself maintenance WARNING Chemicals in the battery ■ Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: Do not cause sparks by touching the battery terminals with tools.
Page 259 7-3. Do-it-yourself maintenance Washer fluid If the washer fluid level is less than “HALF” line, add washer fluid. WARNING When adding washer fluid ■ Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc. NOTICE Do not use any fluid other than washer fluid ■...
Page 260 7-3. Do-it-yourself maintenance Air cleaner filter Check the air cleaner filter as follows: Release the clips. KBAV730410E Lift the cover and take out the air cleaner filter. Inspect the outer surface of the filter, and replace the filter if it is extremely dirty.
Page 261 7-3. Do-it-yourself maintenance WARNING To prevent inhaling dust ■ Wear a respirator when using compressed air to clean the air cleaner filter. NOTICE To prevent damaging the engine ■ Do not drive with the air cleaner filter removed. Doing so causes excessive engine wear.
Page 262 7-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread.
Page 263 Front Front To equalize tire wear and help extend tire life, Toyota recommends that tire rotation is carried out approximately every 5000 km (3000 miles). Tire pressure warning system (if equipped) Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire infla- tion pressure before serious problems arise.
Page 264 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your Toyota dealer. AVANZA_OM_General_OMBZ214...
Page 265 A tire goes flat repeatedly or cannot be properly repaired due to the size or ● location of a cut or other damage If you are not sure, consult with your Toyota dealer. Replacing tires and wheels (vehicles with a tire pressure warning sys- ■...
Page 266 7-3. Do-it-yourself maintenance • If the spare tire is in a location subject to poor radio wave signal recep- tion. • If a large metallic object which can interfere with signal reception is put near the spare tire. • If a wheel, not equipped with a tire pressure warning valve and transmit- ter, is used.
Page 267 If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. When operating the tire pressure warning reset switch, the tire pressure ●...
Page 268 Do not mix tires of different makes, models or tread patterns. ● Also, do not mix tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply ●...
Page 269 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. After use of liquid sealant, make sure to replace the tire pressure warning valve and transmitter when repairing or replacing the tire.
Page 270 Reduced safety ● Damage to the drive train ● If a tire needs frequent inflating, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure ■ When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 271 7-3. Do-it-yourself maintenance WARNING Proper inflation is critical to save tire performance ■ Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: Excessive wear ●...
Page 272 ● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 273 Because tire repair or replacement may affect the tire pressure warning ● valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 274 7-3. Do-it-yourself maintenance ∗ Wireless remote control Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Lithium battery CR1620 (type A) or CR2025 (type B) Replacing the battery Type A ...
Page 275 Use a CR1620 (type A) or CR2025 (type B) lithium battery ■ Batteries can be purchased at your Toyota dealer, local electrical appliance ● shops or camera stores. Replace only with the same or equivalent type recommended by the manu- ●...
Page 276 7-3. Do-it-yourself maintenance If the wireless remote control battery is depleted ■ The following symptoms may occur: The wireless remote control will not function properly. ● The operational range will be reduced. ● WARNING Removed battery and other parts ■ These parts are small and if swallowed by a child, they can cause choking.
Page 277 7-3. Do-it-yourself maintenance ∗ Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Replacement method Turn the engine switch to the “LOCK” position. Open the glove box. Lift it to disengage the claws. Remove the glove box, to pre- vent the claws from getting stuck.
Page 278 7-3. Do-it-yourself maintenance Remove the air conditioning fil- ter and replace it with a new one. The “↑UP” marks shown on the fil- ter should be pointing up. Checking interval ■ Inspect and replace the air conditioning filter according to the maintenance schedule.
Page 279 7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch to the “LOCK” position. Open the fuse box cover.
Page 280 If the lights do not turn on even after the fuse has been replaced, a bulb may ● need replacement. (→P. 280) If the replaced fuse blows again, have the vehicle inspected by your Toyota ● dealer. If there is an overload in a circuit ■...
Page 281 Never use a fuse of a higher amperage rating than that indicated, or use ● any other object in place of a fuse. Always use a genuine Toyota fuse or equivalent. ● Never replace a fuse with a wire, even as a temporary fix.
Page 282 Toy- ota dealer. For more information about replacing other light bulbs, contact your Toyota dealer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (→P. 347)
Page 283 7-3. Do-it-yourself maintenance Halogen bulb type  KBAV731102E Headlights Front turn signal lights Side turn signal lights on the Front fog lights (if equipped) fender (if equipped) Front position lights AVANZA_OM_General_OMBZ214...
Page 284 7-3. Do-it-yourself maintenance Rear ■ Back-up lights Stop/tail lights Rear turn signal lights AVANZA_OM_General_OMBZ214...
Page 285 7-3. Do-it-yourself maintenance Replacing light bulbs Headlights (halogen bulb type) ■ Unplug the connector. Remove the rubber cover. Release the bulb retaining spring. Remove the bulb. To install a new bulb, align the tabs of the bulb with the cutouts of the mounting hole.
Page 286 7-3. Do-it-yourself maintenance Front fog lights (if equipped) ■ Remove the clips. : Vehicles with an aero bumper Remove the clips. Insert the clips. Partly remove the fender liner. AVANZA_OM_General_OMBZ214...
Page 287 7-3. Do-it-yourself maintenance Unplug the connector while depressing the lock release. Turn the bulb base counter- clockwise. Replace the light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. Turn clockwise and secure the bulb base. AVANZA_OM_General_OMBZ214...
Page 288 7-3. Do-it-yourself maintenance Install the connector. Shake the connector gently to check that it is not loose, turn the front fog lights on once and visually confirm that no light is leaking through the mounting. When installing the fender liner and clips, reverse the removing procedure in steps AVANZA_OM_General_OMBZ214...
Page 289 7-3. Do-it-yourself maintenance Front position lights ■ Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed. AVANZA_OM_General_OMBZ214...
Page 290 7-3. Do-it-yourself maintenance Front turn signal lights ■ Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed. AVANZA_OM_General_OMBZ214...
Page 291 7-3. Do-it-yourself maintenance Side turn signal lights on the fender (if equipped) ■ Remove the side turn lens. Turn the bulb base counter- clockwise. Remove the light bulb. Install the side turn lens. AVANZA_OM_General_OMBZ214...
Page 292 7-3. Do-it-yourself maintenance Back-up lights, stop/tail lights and rear turn signal lights ■ Open the back door. Remove bolts remove the light unit while pulling it straight back. Turn the bulb base counter- clockwise. Rear turn signal light Back-up light Stop/tail light Remove the light bulb.
Page 293 ■ Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Contact your Toyota dealer for more information in the following situations: Large drops of water have built up on the inside of the lens.
Page 294 7-3. Do-it-yourself maintenance WARNING Replacing light bulbs ■ Turn off the lights. Do not attempt to replace the bulb immediately after ● turning off the lights. The bulbs become very hot and may cause burns. Do not touch the glass portion of the light bulb with bare hands. When it is ●...
Page 295 When trouble arises 8-1. Essential information 8-2. Steps to take in an emergency Emergency flashers...294 If your vehicle needs to If your vehicle has to be towed ......299 be stopped in an emergency....295 If you think something is wrong.......305 Fire extinguisher ....296 Fuel pump shut off If the vehicle is trapped system ......306...
Page 296 8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 297 8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 298 8-1. Essential information ∗ Fire extinguisher A fire extinguisher is located in the under the front passenger seat. It is for use in emergencies, such as in the event of a fire. Release the fixed band and then remove the fire extin- guisher.
Page 299 8-1. Essential information After using the fire extinguisher ■ Store it securely in place. Replace it with a new one as soon as possible. Expiration date ■ The fire extinguisher has an expiration date. It should be replaced with a new one before the expiry date.
Page 300 However, an emergency hammer can not shatter the windshield as it is lam- inated glass. *: Contact your Toyota dealer or aftermarket accessory manufacturer for fur- ther information about an emergency hammer. Escaping the vehicle from the window ■...
Page 301 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 302 8-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front From the rear   Use a towing dolly under the rear Use a towing dolly under the wheels. front wheels. Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the...
Page 303 8-2. Steps to take in an emergency Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing eyelets. This should only be attempted on hard surfaced roads for at most 80 km (50 miles) at under 30 km/h (18 mph).
Page 304 8-2. Steps to take in an emergency Insert the towing eyelet into the hole and tighten partially by hand. Tighten down the towing eyelet securely using a wheel nut wrench or hard metal bar. Securely attach cables or chains to the towing eyelet. Take care not to damage the vehicle body.
Page 305 8-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When towing the vehicle ■ Be sure to transport the vehicle with all four wheels raised off the ground. If the vehicle is towed with the tires contacting the ground, the drivetrain and related parts may be damaged or an accident...
Page 306 8-2. Steps to take in an emergency NOTICE To prevent damage to the vehicle when towing using a wheel-lift type ■ truck Do not tow the vehicle from the rear when the engine switch is in the ● “LOCK” position or the key is removed. The steering lock mechanism is not strong enough to hold the front wheels straight.
Page 307 8-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal) ●...
Page 308 8-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 309 ); or • Malfunction in the brake system (If equipped). → Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. Charging system warning light Indicates a malfunction in the vehicle’s charging system.
Page 310 SRS warning light Indicates a malfunction in: • The SRS airbag system; or • The seat belt pretensioner system. → Have the vehicle inspected by your Toyota dealer immediately. ABS warning light Indicates a malfunction in the ABS. → Have the vehicle inspected by your Toyota dealer immediately.
Page 311 Toyota dealer. When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system → Have the system checked by your Toyota dealer. Parking brake indicator (warning buzzer Warns the driver to release parking brake.
Page 312 If the fuel tank is empty, refuel the vehicle immediately. The malfunction indi- cator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact your Toyota dealer as soon as possible. Passenger detection sensor, passenger seat belt reminder and warning ■...
Page 313 8-2. Steps to take in an emergency When the tire pressure warning light comes on (vehicles with a tire pres- ■ sure warning system) Inspect the appearance of the tire to check that the tire is not punctured. If the tire is punctured: →P. 314 If the tire is not punctured: Carry out the following procedure after the tire temperature has lowered suffi- ciently.
Page 314 If the tire pressure warning light frequently comes on after blinking for 1 ■ minute (vehicles with a tire pressure warning system) If the tire pressure warning light frequently comes on after blinking for 1 min- ute when the engine switch is turned on, have it checked by your Toyota dealer. AVANZA_OM_General_OMBZ214...
Page 315 If both the ABS and the brake system warning lights remain on ■ Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
Page 316 8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: →P. 260 WARNING If you have a flat tire ■...
Page 317 8-2. Steps to take in an emergency Location of the spare tire, jack and tools Location ■ Tool bag Spare tire Jack Tools ■ Spanner Wheel nut wrench Extensions Towing eyelet AVANZA_OM_General_OMBZ214...
Page 318 8-2. Steps to take in an emergency WARNING Using the tire jack ■ Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Do not use the tire jack for any purpose other than replacing tires or install- ●...
Page 319 8-2. Steps to take in an emergency Taking out the jack Move the front left seat to the front most position and pull up the cover. KBAV820403E Turn the jack joint to take out the jack. AVANZA_OM_General_OMBZ214...
Page 320 8-2. Steps to take in an emergency Taking out the spare tire Loosen the spare tire clamp bolt using wheel wrench. Lift the tire holder up slightly and unhook the clamp from the tire holder. Gently lower the tire holder until it touches the ground and take out the spare tire.
Page 321 8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 322 8-2. Steps to take in an emergency Assembling the jack handle. Remove the wheel nut wrench and extensions from the tool bag and assemble by following these steps. Loosen the bolts using a spanner. Assemble extensions and tighten the bolts. Check that the bolts are firmly tightened.
Page 323 8-2. Steps to take in an emergency Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. Front Rear   Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire.
Page 324 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
Page 325 8-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 326 8-2. Steps to take in an emergency Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 103 N·m (10.5 kgf·m, 76 ft·lbf) Do not use other tools or any addi- tional leverage other than your hands, such as a hammer, pipe or your foot.
Page 327 8-2. Steps to take in an emergency Secure the clamp by tightening the clamp bolt. Stowing the jack and tools Put the arm onto portion the bracket, as shown in the illustration. Be sure to adjust the arm so that portions of the bracket are inside the arm.
Page 328 When replacing the tires (vehicles with a tire pressure warning system) ■ When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. AVANZA_OM_General_OMBZ214...
Page 329 ● One or both of the battery terminals may be disconnected. ● The battery may be discharged. (→P. 328) ● There may be a malfunction in the steering lock system. Contact your Toyota dealer, if the problem cannot be repaired, or if repair procedures are unknown. AVANZA_OM_General_OMBZ214...
Page 330 The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 331 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. Starting the engine when the battery is discharged ■...
Page 332 8-2. Steps to take in an emergency WARNING Avoiding battery fires or explosions ■ Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery: Make sure each jumper cable is connected to the correct terminal and that ●...
Page 333 (radia- tor) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer. The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir.
Page 334 (The fan may not operate in freezing temperatures.) If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 335 8-2. Steps to take in an emergency WARNING To prevent an accident or injury when inspecting under the hood of ■ your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. If steam is seen coming from under the hood, do not open the hood until ●...
Page 336 8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P (automatic transmission) or N (manual transmission).
Page 337 8-2. Steps to take in an emergency NOTICE To avoid damage to the transmission and other components ■ Avoid spinning the rear wheels and depressing the accelerator pedal more ● than necessary. If the vehicle remains stuck even after these procedures are performed, ●...
Page 338 8-2. Steps to take in an emergency AVANZA_OM_General_OMBZ214...
Page 339 Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)...338 Fuel information ....348 9-2. Customization Customizable features ..349 9-3. Initialization Items to initialize ....354 AVANZA_OM_General_OMBZ214...
Page 340 9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions 4190 mm (165.0 in.) Overall length 4200 mm (165.4 in.) Overall width 1660 mm (65.3 in.) Overall height 1695 mm (66.7 in.) Wheelbase 2655 mm (104.5 in.) Front 1425 mm (56.1 in.) Tread Rear 1435 mm (56.5 in.)
Page 341 9-1. Specifications Vehicle identification Vehicle identification number ■ The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toy- ota. It is used in registering the ownership of your vehicle. This number is stamped in the engine compartment.
Page 342 9-1. Specifications For G.C.C. countries , Repub- lics of Yemen, Jordan, Leba- and Iraq: This number is also on the Certification Regu- lation plate. : Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar, Kuwait : For vehicles with model code that has “V”...
Page 343 9-1. Specifications Engine Model 1NR-VE and 2NR-VE Type 4-cylinder in line, 4-cycle, gasoline 1NR-VE engine  72.5 × 80.5 mm (2.85 × 3.17 in.) Bore and stroke 2NR-VE engine  72.5 × 90.6 mm (2.85 × 3.57 in.) 1NR-VE engine ...
Page 344 Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 0W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”...
Page 345 9-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil contain- ers to help you select the oil you should use. API Service Symbol Top portion: “API SERVICE SN” means the oil quality designa- tion by American Petroleum Institute (API).
Page 346 5.5 L (5.8 qt., 4.8 Imp.qt.) 6.1 L (6.4 qt., 5.4 Imp.qt.) 5.2 L (5.5 qt., 4.6 Imp.qt.) Use either of the following: • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-...
Page 347 Fluid capacity 4.9 L (5.2 qt., 4.3 Imp.qt.) Use either of the following: Fluid type • Toyota Genuine ATF Type T-IV ® • DEXRON : The fluid capacity is a reference quantity. If replacement is necessary, con- tact your Toyota dealer.
Page 348 9-1. Specifications Clutch 1NR-VE engine  15 — 25 mm (0.6 — 1.0 in.) Pedal free play 2NR-VE engine  3 — 20 mm (0.1 — 0.8 in.) Fluid type (2NR-VE engine) SAE J1703 or FMVSS No. 116 DOT 3 Brakes Pedal clearance 111 mm (4.4 in.)
Page 349 9-1. Specifications Light bulbs Light Bulbs Type Headlights (halogen bulb type) 60/55 Front turn signal lights Front position lights Front fog lights (if equipped) Side turn signal lights on the fender Exterior (if equipped) Rear turn signal lights Stop/tail lights 21/5 E or B License plate lights...
Page 350 Use of ethanol blended gasoline in a gasoline engine ■ Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 351 Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. Programming these pref- erences requires specialized equipment and may be performed by your Toyota dealer. Customizing vehicle features When customizing vehicle features, ensure that the vehicle is parked in a safe place with the shift lever in P (automatic transmission) or N (manual transmission) and the parking brake set.
Page 352 9-2. Customization Changing by using the wireless remote control (For vehicles ■ sold in Malaysia) Operation signals of wireless remote control can be changed with the following procedures. Remove the key from the engine switch and check that the alarm is disarmed.
Page 353 Settings that can be changed using the multi-information display Settings that can be changed using the inside lock knob Settings that can be changed by your Toyota dealer for further details Definition of symbols: O = Available, — = Not available Wireless remote control (→P.
Page 354 9-2. Customization Turn signal light (emergency flasher) (→P. 144) ■ Default Customized Function setting setting Buzzer operation — — The number of times the turn signal lights flash automati- cally, when the turn signal — — lever is moved to the partial position.
Page 355 9-2. Customization Multi-information display (→P. 74) ■ Default Customized Function setting setting Eco Driving Indicator Light — — WARNING During customization ■ As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
Page 356 9-3. Initialization Items to initialize The following item must be initialized for normal system opera- tion after such cases as the battery is reconnected, or mainte- nance being performed on the vehicle. Item When to initialize Reference • After reconnecting or changing the battery Power windows P.
Page 357 Index What to do if... (Troubleshooting) .....356 Alphabetical index ......359 AVANZA_OM_General_OMBZ214...
Page 358 Toyota dealer. The doors cannot be locked, unlocked, opened or closed You lose your keys If you lose your keys, new genuine keys can be made by your Toyota ● dealer. (→P. 80) The doors cannot be locked or unlocked (vehicles with a wireless remote control) ●...
Page 359 What to do if... (Troubleshooting) If you think something is wrong The engine does not start Vehicles with a manual transmission: ● Did you turn the key while firmly depressing the clutch pedal? (→P. 137) ● Vehicles with an automatic transmission: Is the shift lever in P? (→P.
Page 360 What to do if... (Troubleshooting) An alarm is activated and the horn sounds (if equipped) ● Did anyone inside the vehicle open a door during setting the alarm? (→P. 64) Do one of the following to deactivate or stop the alarm: ●...
Page 361 Alphabetical index Alphabetical index Audio system ......170 Antenna ........ 175 A/C..........188 Audio input......172 Front air conditioning AUX port ....... 172 system ........ 188 CD player......176 Rear cooler system ....195 MP3/WMA disc ..... 176 ABS (Anti-lock Brake Optimal use......
Page 362 Alphabetical index Child safety ........ 45 Airbag precautions....40 Care........208, 211 Battery precautions....256 Aluminum wheels....209 Child restraint systems ... 46 Exterior........208 How your child should wear Interior........211 the seat belt......35 Seat belts ......212 Installing child restraints ..
Page 363 Alphabetical index Emergency, in case of If the engine will not start ..327 Defogger If the vehicle battery is Windshield ......190 discharged......328 Dimensions ......338 If the warning buzzer Display sounds........ 307 Drive monitor display ....73 If the warning light Multi-information display ..
Page 364 Alphabetical index Engine immobilizer system ..62 Front turn signal lights ... 144 Replacing light bulbs..... 288 Engine oil........248 Turn signal lever ....144 Capacity ........ 342 Checking ....... 248 Wattage ........ 347 Preparing and checking Fuel before winter....... 165 Capacity........
Page 365 Alphabetical index Jack Hazard lights Switch ........294 Positioning a floor jack..246 Head restraints......100 Vehicle-equipped jack... 315 Headlights ........ 146 Jack handle ......315 Light switch ......146 Jam protection function Replacing light bulbs..... 283 Power window....... 114 Wattage.........
Page 366 Alphabetical index Lights Fog light switch ..... 148 Odometer........74 Headlight switch....146 Illuminated entry system ..199 Engine oil ......342 Interior light ......198 Manual transmission oil ..345 Interior lights list ....197 Opener Personal lights ...... 199 Back door........
Page 367 Alphabetical index How to wear your seat belt ..32 How your child should wear Radiator ........252 the seat belt......35 Radio......... 174 Pregnant women, proper Rear fog light......148 seat belt use ......36 Replacing light bulbs..... 291 Reminder light and buzzer..
Page 368 190 Rear window wiper and Tools ......... 315 washer switch ..... 152 Top strap ........57 Tire pressure warning Toyota parking reset switch......262 assist-sensor ......157 VSC off switch....... 162 Towing Window lock switch....113 Emergency towing ....299 Windshield wipers and Towing eyelet......
Page 369 Alphabetical index Washer......150, 152 Checking....... 257 USB port ........172 Preparing and checking before winter....... 165 Switch ......150, 152 Vehicle data recordings ....7 Washing and waxing ....208 Vehicle identification Wheels ........270 number ........339 Replacing......270 Vehicle Stability Control Size........
Page 370 GAS STATION INFORMATION Fuel filler door Auxiliary catch lever P. 156 P. 244 Hood lock release Tire inflation pressure Fuel filler door opener knob P. 346 P. 156 P. 244 Fuel tank capacity 45 L (11.9 gal., 9.9 Imp.gal.) (Reference) Fuel type P.

Toyota Avanza Owner's Manual

1 For Safety and Security

For Safe Use

Theft Deterrent System

2 Instrument Cluster

3 Operation of each Component

Key Information

Adjusting the Seats

Before Driving

Driving Procedures

Using the Driving Support

5 Audio System

Basic Operations

Quick Links

Troubleshooting

Need help?

Questions and answers

Summary of Contents for Toyota Avanza

Toyota Avanza Owner's Manual

1 For Safety and Security

For Safe Use

Theft Deterrent System

2 Instrument Cluster

3 Operation of each Component

Key Information

Adjusting the Seats

Before Driving

Driving Procedures

Using the Driving Support

5 Audio System

Basic Operations

Quick Links

Troubleshooting

Need help?

Questions and answers

Related Manuals for Toyota Avanza

Summary of Contents for Toyota Avanza

Table of Contents