Page 4
User manual LAM1748 Dear Customer, Congratulations on your choice of hob. The user manual will help you use your product quickly and safely. • Please read this user manual before installing and using the hob. • Always follow the safety instructions.
LAMONA Appliances Index Before Using the hob Safety General Fire safety advice If a pan catches fi re Deep fat frying If you have an Electrical Fire Using your hob Controls Layout Turning on the hob 08-09 Booster Turning off the hob...
User manual LAM1748 Before using the hob • Make sure that you have removed all packaging, wrappings, stickers and fi lms from the hob surface. • It is recommended that you clean the hob surface before using for the first time (page 13).
Page 7
LAMONA Appliances • Always match the size of hob. They could become hot if pan to the heat zone – do not they are near a cooking area use large pans on small zones which is in use. or vice versa.
User manual LAM1748 Fire safety advice Deep-fat frying presents more dangers in your kitchen • Most kitchen fires occur when people are distracted or • If you have put the fire out, leave things unattended, so leave the pan to cool com- remember: pletely.
LAMONA Appliances Using the hob Do not use the ceramic hob if the glass surface is cracked, as electrical parts are directly beneath. Switch off the appliance at the supply to prevent electric shock and contact your supplier. The appliance is not intended to be operated by means of an external timer or separate control system.
User manual LAM1748 Using the hob Turning off the hob If you press main key for longer than 2 seconds, the hob will turn off and return to Standby mode. If the hob zone surface is hot when the hob is turned off, this will be indicated with H / h symbols that appear on the relevant cooking zone.
LAMONA Appliances Child Lock Cooking zone timer (To turn a cooking zone off after a period of timed use) Activating child lock The cooking zone timers can only be set for the 1.Touch power key to turn on the hob.
User manual LAM1748 • By touching keys simultaneously for half second until appears on timer display. When the time is over, an audible alarm will sound. Touch any key on the touch control panel to silence the audible alarm. Operation time limits The hob control is equipped with an operation time limit.
LAMONA Appliances Sensor Calibration The following lightning conditions will allow a smooth calibration: When the supply power is applied, the hob control Illumination by a lamp without a reflector 70 cm system performs calibration depending on the above the glass ceramic hob. After a successful sensor, glass and ambient conditions.
User manual LAM1748 Cleaning & maintenance How to clean your hob • The ceramic hob top can be cleaned using a • Regular cleaning will prevent any salts or clean, damp cloth or kitchen paper. Do not minerals from accumulating on your hob and use a used dishcloth or sponge as they can discolouring the glass.
LAMONA Appliances Installation Clearances and dimensions requirements Min distance between cabinets must be equal to the overall width of all hobs 400mm min 100mm 268mm 490mm 60mm 50mm Minimum heig ht to extractor as recommend in extractor instruction manual No shelf or overhang of combustible material should be closer than 650mm directly above the hob.
User manual LAM1748 Installation Installation above an oven If the appliance is installed with an oven underneath, please leave at least 15mm of Before installation ventilation, unless otherwise stated in your oven installation guidelines. The product should only be installed by suitably...
LAMONA Appliances Electrical Connections IMPORTANT: Ensure that the electricity supply is switched off before connecting. Your hob is intended for permanent installation. a i l i r i with at least 3mm contact separation. The isolation switch must be accessible after installation (see technical data for fuse rating).
User manual LAM1748 The appliance may be connected to the mains supply only by a competent person. The mains lead must not be clamped, bent, trapped, or come into contact with hot parts of the appliance. If the mains lead is damaged, it must be replaced by a qualifi ed person (mains cable must not be longer than 2m for safety reasons).
LAMONA Appliances Troubleshooting Product or pans emit metal noises while heating and cooling. • When the metal parts are heated, they may expand and cause noise. >>> This is not a fault. Product makes clicking noise when operating. • This is the electronic controls working.
Call the Depot number on your Proof of Purchase Document supplied with the product / kitchen. Call the LAMONA Service Line on 0344 460 0006 * Product installed within a domestic kitchen or non-domestic kitchen where 8 or fewer people are using the appliance.
Page 24
Product serial number (Place sticker here) Issue v3 230617 185.9238.43/R.AB/28. 06.2017...
Need help?
Do you have a question about the LAM1748 and is the answer not in the manual?
Questions and answers