Removing The Headrail (If Necessary); Removing The Vanes (If Necessary); Cleaning Procedures - Kirsch Vertical Blinds Series Installation Instructions Manual

Removing the Headrail (If Necessary)

To remove the headrail, locate the rear tab on the mounting clip.
■
Push up on the rear tab to release the headrail.
■

Removing the Vanes (If Necessary)

Push up on the vane.
■
Gently open the vane hook by inserting a 'credit card' sized piece of rigid plastic between the vane and the long prong of the
■
vane hook.
Carefully remove the vane.
■

Cleaning Procedures

Dusting
Regular light dusting with a feather duster is all the cleaning that is needed in most circumstances.
■
Vacuuming
Use a hand-held vacuum with low suction for more thorough dust removal.
■
Spot-Cleaning
Prepare a solution of warm water and a mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Dab the spot with the dampened cloth until it is gone.
■
CAUTION: Vertical fabrics should not be spot-cleaned or immersed in water.
Compressed Air
You can use compressed air or a hair dryer (cool setting) to blow the dust off your valance.
■
INSTALLATION
Vertical Track Headrail
Tilt to
Rear Tab
Remove
Push Up
CARE
10