Basic Copy and Swap Operations
Copy and Swap Using Menu Operations
For copy and swap operations, use the COPY menu. The basic menu
operation is as follows.
1
Press the MISC button in the SYSTEM group of the menu control
section.
2
Select item 5 (COPY).
The COPY menu appears.
F1
3
Press one of F3 (M/E) to F6 (MATTE) to select the type of data to be
copied or swapped.
The function key indications change as follows, except that F5 (XPT
DSBL) appears only if you selected F3 (M/E) or F4 (KEYER) in step 1.
LAST X
F1
4
Press F3 (FROM) or turn control knob 2 to align the cursor on the
"FROM" side with the source of the copy or swap. You can also use the
cursor keys ( > . ? / ).
Depending on the keyer you select for the source, a list of the destination
selections appears on the "TO" side.
M/E
KEYER
WIPE
F2
F3
F4
F5
Function key indications in the COPY menu
XPT
FROM
DSBL
#2
OFF
F2
F3
F4
F5
MATTE
F6
F7
F8
F9
EXEC
TO
SWAP
#3
F6
F7
F8
F9
Chapter 11 Copy and Swap Operations
F10
COPY
F10
(Continued)
11-5