DESCRIPTION AND PRINCIPLE OF OPERATION
4. Continue to hold this button until the lightbar no longer flashes.
The lightbar stays blue when the Riomote control is connected to the receiver.
5. Press the 'Start engine' button on the Riomote control to start the engine.
NOTE
The 9-channel Riomote control is shown as an example.
6. Press the emergency stop button on the Riomote control:
If everything is working properly, the engine will now be shut off.
WARNING!
If the engine does NOT shut off when the emergency stop button is pressed, the
machine may NOT be operated with the Riomote control. In that case, contact
Rioned.
2.4.3 Replacing the battery
If the indicator light on the Riomote control lights up, the battery should be
replaced with a charged battery:
If the battery is not replaced, the Riomote control will switch off after a short time.
Charge the flat battery so it can be used again. The battery charger is located in
the vehicle cab.
Battery operating time: 12 hours (at 20 °C)
Battery charging time: 4 hours (between 5 and 45 °C)
26
Need help?
Do you have a question about the CityJet and is the answer not in the manual?
Questions and answers