Adjusting The Load Leg - Cybex Platinum SIRONA Z i-Size User Manual

9
9
28

ADJUSTING THE LOAD LEG

Make sure that the load leg (4) is fixed in the forward position. Push the
adjustment button (9) upwards on the load leg and press it to pull the
load leg. Pull the load leg (4) out until it touches the vehicle floor. After
this, pull the foot out to the next locking position to ensure optimal force
transmission. The load leg indicator (10) on the base will show GREEN
and the characteristic noise will stop.
!
NOTE! Make sure that the base rests as flat as possible on the car seat.
10
4
WARNING! The load leg (4) must always be in direct
contact with the vehicle floor. There must be no objects
or spaces between the vehicle floor and the load leg.
If there are storage compartments in the floor of the
vehicle you must contact the vehicle manufacturer.