GE ALPS Instruction Manual page 265

11 ALPS-LINK USER GUIDE
e) RESET DATA
This item helps you to reset specific data in a ALPS device.
To reset any of the data, choose the Reset Data item in the Actions menu. A dialog box will appear with various data items
which can be reset. Check the associated check boxes, for all the data items which you want to reset. Choose OK to pro-
ceed with resetting of selected items or choose Cancel to abort the reset operation. While you choose OK if the Breaker
Health Data item is checked, another dialog box appears asking you to enter new breaker health values. If you choose OK,
the ALPS-Link will send an appropriate message to the device. If you choose Cancel then ALPS-Link will uncheck the
Breaker Health Data item and brings you back to the Reset Data dialog box.
f) DIGITAL OUTPUT TEST
When you choose this item from the Actions menu, a dialog box appears with the list of output types.
Select an output test from the list and choose OK to proceed or choose Cancel to quit. If you choose OK, ALPS-Link will
send an appropriate command to the device.
g) RELAY TEST
When you choose Relay Test item from the Actions menu, a dialog box with a list of available test modes will appear.
Select a test mode you want and choose OK to proceed with the test. Choose the Cancel button to quit the testing.
Select the End Of Relay Test item from the list to bring the device out of the test mode. If you leave the device in a test
mode, during the logout from the device, ALPS-Link will remind you that you have left the device in the test mode.
The error message OTHER USER IS ACCESSING THIS RESOURCE will appear if the relay is in test mode
from another port, or the keypad.
NOTE
h) OPEN BREAKER
Choose this menu item to open the breaker, this will prompt you with the confirmation message box. Click Yes to open the
breaker. The ALPS will send command to the device to open the breaker.
i) CLOSE BREAKER
Choose this menu item to close the breaker. This will prompt you with the confirmation message box. Click Yes to close
breaker. The ALPS will send command to the device to close the Breaker.
GE Power Management ALPS Advanced Line Protection System
11.5 SETTINGS AND ACTIONS
11
11-13