Proper Care & Cleaning; General Cleaning - Sharp SWD-77EH-BK Quick Start Manual

Top and bottom load water dispenser
Table of Contents

Advertisement

PROPER CARE & CLEANING

General Cleaning

Perform: As needed
Time Required: 5 minutes.
Note: Do NOT use abrasive materials or chemical cleaners.
1. Clean cabinet surfaces with a soft cloth and warm soapy water.
2. Wipe dust from back of dispenser to improve efficiency.
3. Remove drip tray assembly by sliding it forward. Remove cover. Place tray and cover in
dishwasher or wipe parts clean with a soft cloth and warm soapy water.
4. Reattach drip tray assembly.
Sanitizing
Perform: Every 3 months or whenever an off-taste occurs.
Time Required: 30 minutes.
Note: Best done prior to loading a fresh bottle.
Step A: Remove Existing Water
1. Move the dispenser away from the wall and rotate it so that the drain plug ie
accesible.
2. Turn the power switches to OFF.
3. Unplug the power cord from the wall outlet.
4. Place a 2 gallon or larger bucket under the drain plug in the rear of the dispenser.
5. Use screw driver to remove screw holding drain cap and remove drain plug. Cold
water will immediately flow into the bucket. After several seconds, hot water will be
dispensed.
6. Reminder – place the drain cap and in a safe location so that they will not be lost.
7. Once the unit has been drained, replace the drain plug and the drain cap and secure
by the screw.
8. Remove the remaining water from the reservoir by dispensing from the cold tap into
a pitcher.
13

Advertisement

Table of Contents
loading

Table of Contents