Table of Contents
Advertisement
USING YOUR DEHUMIDIFIER
Error Codes
AS – Humidity Sensor Error. Unplug the unit and plug it back in. if the
error continues, call customer service.
ES – Temperature Sensor Error – Unplug the unit and plug it back in. If
error continues, call customer service.
P1 – Unit is defrosting. Allow the unit time to automatically defrost. The
error code will disappear once the unit has defrosted.
P2 – Water drawer is full or drawer is not in the right position. Empty
the drawer and replace in the correct position.
E3 – Unit malfunction – unplug the unit and plug back in. If the error
repeats, call customer service.
EC -Refrigerant leakage detection. With this new technology, the display
area will appear EC when the unit detects refrigerant leakage, call
customer service.
EMPTYING YOUR DEHUMIDIFIER
There are two ways to remove collected water:
Collection in the Water Tank
•
When the water tank is full, the unit will automatically stop running,
and the Full indicator light will illuminate.
•
Slowly pull out the tank and grip the left and right handles securely
and carefully. Pull out the water tank straight so the water in the
tank does not spill. Do not put the tank down because the bottom of
the drawer is uneven.
•
Empty the water and replace the tank. The tank must be correctly
inserted for the dehumidifier to restart operation.
•
The machine will restart operation after 3 minutes
Page 14
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RHDH2002 and is the answer not in the manual?
Questions and answers
just bought a russel hobbs laundry mode dehumidifier and when i put it on laundry mode it stopped after awhile indicating it was full when checked drawer very litle water in it
The Russell Hobbs RHDH2002 dehumidifier may stop in laundry mode and indicate that it is full even when there is little water in the drawer due to one of the following reasons:
1. Water Tank Misalignment – The dehumidifier will shut off if the water tank is not properly positioned.
2. Sensor Sensitivity – The water level sensor may detect a full condition incorrectly if there is an issue with the sensor.
3. Auto Shut Off Feature – If the selected humidity level is reached, the unit will stop operation.
4. Error or Blockage – There could be a blockage or an issue with the internal drainage system affecting water collection.
Checking the correct placement of the water tank and ensuring there are no obstructions may help resolve the issue.
This answer is automatically generated