Advertisement
Custom program
The custom program allows you to build and save a custom program.
You can build your own custom program by following the instructions
below. The custom program allows you to further personalize it by
adding your facility name.
• Designing and saving a new program as a custom program. The
message window will show a welcome message; if you had
previously saved a program the message will contain the name you
gave it. Then press the Con rm key to begin programming.
- When you press Confirm, the Message Window will show
"Name – XXXXXXX", if there is no name saved. If the name
"CustomA" had been previously saved the Message Window will
show "Name – CustomA" and the C in Custom will be blinking. If
there is a name saved you can change it or you may press the Stop
key to keep the name and continue to the next step. If you want to
enter a name use the Plus and/or the Minus key to change the rst
letter then press Con rm to save the rst letter and continue to the
next letter. When you have finished entering the name press the
Stop key to save the name and continue to the next step.
- The Message window will ask you to enter an Age. You may enter an
Age, using the Plus and Minus keys, then press the Con rm key to
accept the new number and proceed on to the next screen.
- You are now asked to enter a Weight. You may adjust the Weight
number using the Plus and Minus keys and then press Con rm to
continue.
- Next is Time. You may adjust the Time and press Confirm to
continue.
- Now you are asked to enter the speed of each segment.
24
Advertisement
