Advertisement
Assembly
Read each step's instructions and study the drawing carefully to become
familiar with all the parts and procedures before beginning each step.
Step 1.
• Attach one Fixing Plate (66) and Left Console Mast (33) to Frame (1)
using five Bolts (128), five Split Washers (130), and five Flat Washers
(129). Do not tighten before putting the console on.
• Connect Wires (41) from the Right Console Mast (34) with another
Wires (178 ) from the Frame (1). Then attach another Fixing Plate (66)
and Right Console Mast (34) to Frame (1) using five Bolts (128), five
Split Washers (130), and five Flat Washers (129). Do not pinch Wires
(41 & 178). Do not tighten before putting the console on.
Hardware for step 1
Part
Type
128
Bolt
129
Flat washer
130
Split washer
33
129
66
130
128
129
130
129
128
130
128
Description
Qty
3/8" × 3"
Ø3/8" × Ø35 x 2T
Ø10 × 2.0T
34
130
129
129
41
178
66
129
142
11
6
10
10
128
128
130
128
130
Advertisement
