Related Manuals for Wallbox PULSAR
Summary of Contents for Wallbox PULSAR
- Page 1 & drive PULSAR INSTALLATION GUIDE WBPL-B-IG-002 PULSAR - installation guide...
-
Page 2: Table Of Contents
Disregard of or actions contrary to the safety information and instructions contained in this manual and printed on the device, may lead to electric shock, fire and/or severe injury and can either damage the vehicle’ s battery or the Wallbox device. Any resulting damage from such actions is excluded from the warranty. -
Page 3: Safety Instructions
The Wallbox chargers can only be used under the specified operating parameters and within the normal environmental conditions described on Product description. • Do not use your Wallbox charger under inclement weather conditions that could affect either the vehicle or the Wallbox device. Do not open the panel cover in the rain. CONNECTOR RECOMMENDATIONS •... -
Page 4: Product Description
• The Wallbox device is an smart charger provided with connectivity functionalities. Wallbox software allows our technical support service to solve issues remotely, no wait times and no need to set appointments and almost instantaneously. The Wallbox device is provided with an specific Electric Vehicle Connector (EVC). Depending on the version acquired it comes equipped with: •... - Page 5 2 - 7,4kW S - Socket 0 - No EVC 3 - 11kW 4 - 22kW The delivered Wallbox charger components must comply the following list ¹ : • Wallbox Pulsar • Holder • Installation Guide • Drilling templates Mounting Components...
-
Page 6: Installation Instructions
Please contact an electrician or arrange installation at your premises with your local distributor PRECAUTIONS Take special care while selecting the mounting surface, it has to be constructed in order to withstand your Wallbox weight and the mechanical forces associated with the charging process. -
Page 7: Dimensions & Positioning
DIMENSIONS & POSITIONING Be fore selecting the mounting situation of your Wallbox, please read the following tips and references: According to the product standard, the charging station must be located at a height (y) between 1,3m and 1, 7 m. We recommend mounting the charging station at a height of 1, 6 m. -
Page 8: Mount
CURRENT (A) BACKSIDE MOUNTING IMPORTANT: In case your wallbox is using a backside-wall cable connection, please follow these steps. If not using such cable connection, please go to MOUNTING section. Step 1: In the backside of the wallbox charger you will find an insertion with a end plug. - Page 9 Step 2. 1 : Proceed to fix your charger to the wall. Insert the screws in the positions marked, starting with the top left one, and continuing clockwise. Verify that your Wallbox is firmly attached and insert the plugs to complete this process.
- Page 10 DRILL & MOUNT Step 2.4: Confirm the previous four steps. Step 2.5: Reconnect the cover communication cable. POWER SHARING (OPTIONAL) If your charger comes with Power Sharing please follow the instructions in the “Power Sharing Manual” • Available at wallbox.com/installation...
-
Page 11: Startup
Step 3: Fix the socket to the wall. Insert the screws in the positions marked. STARTUP Once the DRILL & MOUNT process is completed your Wallbox is ready to operate. But first lets take a moment to read and review some useful information before starting to use your Wallbox: •... -
Page 12: User Guide
Remeber to ensure that the power supply is turned off, before start cleaning your charger. • In case you want to clean your Wallbox, we recommned you to use a soft, dry or damp cloth. Do not use a spray or direct water to clean your Wallbox charger.
Need help?
Do you have a question about the PULSAR and is the answer not in the manual?
Questions and answers