TeleCall
6.4.1
Installing Telecall
6.4.1.1
Preparations
Ê Draw up a list of the node names of all machines that are to belong to the
TeleCall cluster.
Ê Check whether all machines in the above-mentioned list can be accessed
from the LAN Console, for example using
ping <NodeName>
In this case, NodeName is identical to ConsoleName if this was selected in the
mklancon command.
Ê If you want a German language environment for the software installation,
you have to set the LANG variable to De_DE.88591, otherwise set it to
En_US.ASCII.
6.4.1.2
Software installation on the LAN Console
Ê Install the SMAWtelx software package with the installer command from the
system management CD. The software package is then installed automati-
cally.
Ê You respond as follows to the questions prompted during the installation:
Select package(s) you wish to process (or 'all' to process all packages).
(default: all) [?,??,q]: all
Do you want to install these as setuid/setgid files [y,n,?,q] y
Do you want to continue with the installation of <SMAWtelx> [y,n,?] y
66
Configuration
U41224-J-Z916-1-76