Siemens SINUMERIK 840D sl Function Manual page 88

3 Setting up functions
3.1 Maintenance
All functions and user configurations set up
In the configurations overview, the first column shows the configuration type. The
"Name" column shows the configuration names (in alphabetic order). The
"Required for" column shows other configurations that use this subconfiguration.
The "Dependent on" column shows which other configurations are used as
subconfigurations in this configuration.
A gradual fading is used for configuration names that cannot be displayed in full.
The overview can be completely printed out for documentation purposes (printer

icon ).
The overview can be exported for the purpose of comparing the configurations and
names, and can be compared with overview exports of other machines in a
spreadsheet program, for example (
Note
The icons are only available if a machine is selected.
As soon as a machine is selected, the function for displaying a group-based
overview of all the configurations that the user has created for the machine
becomes available. If required, the selection for display can be set up in the "Set
Up Functions" window.
Fig. 3-1: Displaying overview
3-88

icon).
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
03/2013

