Controls - Miele PT 8257 WP Operating And Installation Instructions

en - Description of the machine

Controls

a
Display
When the tumble dryer is switched on, the welcome screen will appear briefly followed
by the programme list. The most recently started programme is pre-selected (high-
lighted).
b
Function buttons
These buttons are allocated specific functions, which vary according to the machine
status. The current functions of these buttons are shown in the display via the buttons.
After the button is activated, the selected function remains highlighted in the display.
Alternatively, the function buttons can be reprogrammed to "Direct button assignment".
In this case, the first 6 programmes in the programme list can be selected directly using
buttons 1–6.
c
 button
The light ring around the button flashes when a selected programme can be started. The
selected programme starts when the start button is pressed. After a programme has
been started, the display content can be shown as before by pressing the start button
again.
d
PC optical interface
Using PC software, data can be transmitted to and from the controls to a PC.
e
Selector dial
The outer ring is used to select the display and input fields. Pressing the inner button al-
lows changes to be made to the display selection and input fields and also confirms
these changes.
f
Card reader
If the machine is programmed for card operation, only drying programmes on the card
can be selected. The card must be inserted into the card reader in the direction of the
arrow.
g
 button
Switches the machine on.
h
 button
Switches the machine off.
10