Table of Contents
Advertisement
Issue 6
8 - 46
2.
Set CT(A)-R Unit switches to default settings. Refer
to
Table 8-4 CT(A)-R Unit Switch
Table 8-4 CT(A)-R Unit Switch Settings
Switch
SW1
Sets impedance to 600
SW3–1
modems or facsimile machines.
Used for complex impedance devices such as
SW3–2
Single Line Telephones.
DSW
3.
Hook tabs A and B in the slots on the Multiline
Terminal as shown in
CT(A)-R Unit to the DTH/DTR Multiline
and press down until the unit clicks into place.
Figure 8-59 Attaching the CT(A)-R Unit to the DTH/DTR
Multiline Terminal
4.
Install the extended base cover.
Installing Electra Elite IPK and D
Settings.
Setting/Description
1 (default)
for devices such as
Figure 8-59 Attaching the
term
Series i Equipment
Electra Elite
Terminal,
Advertisement
Table of Contents
