Table of Contents
Advertisement
Issue 6
LED
LED 1, AP1
Application Software
LED 2, AP2
LED 3, DRIVE
LED 4, CF PWR
LED 5, ICGA
LED 6, Switch S3
Indication
LED 7, SHUT DOWN
LED 8, Power
LED 9, FED DSP
LED 10, CH1
LED 11, CH2
LED 12, CH3
LED 13, CH4
LED 14, CH5
LED 15, CH6
LED 16, CH7
LED 17, CH8
The first four channel LEDS are also used during startup to signify:
LED 1,BICOM driver loaded
LED 2, Scandisk completed successfully
LED 3, CoSession Host loaded successfully
LED 4, Voice Mail started successfully
After system is up and running these LEDs are turned off, and all channels are ready to receive calls.
When Voice Mail fails to start, all eight channel LEDs and the BCLR LED (AP1) are on.
5 - 80
5.6.7
Table 5-40 VMS/FMS/CMS(2)/(4)/(8)-U30 ETU LED Indications
Description
Running, no errors
Running with errors
Not Running
Not Used
Hard Drive Access
Power to the ETU
Live LED
Do not remove Voice
Mail from KSU
Safe to remove Voice
Mail from KSU
Receiving KSU power
For development only
OFF/ON HOOK status Red for Off Hook
OFF/ON HOOK status Red for Off Hook
OFF/ON HOOK status Red for Off Hook
OFF/ON HOOK status Red for Off Hook
OFF/ON HOOK status Red for Off Hook
OFF/ON HOOK status Red for Off Hook
OFF/ON HOOK status Red for Off Hook
OFF/ON HOOK status Red for Off Hook
LED Indications
Refer to
Table 5-40 VMS/FMS/CMS(2)/(4)/(8)-U30 ETU
LED Indications
On
Green
Amber
Red
Not Used
Red if accessed
Red if power is on
Not Used
Red every 125ms
during operation
Red when S3 in
RUN
Red when S3 in
SHUT DOWN
Red if power is on r
Not Used
Flashing
Not Used
Not Used
Not Used
Not Used
Not Used
When not accessed
Not Used
No power to ETU
Operation is shut
Not Used
S3 not in RUN
Not Used
S3 not in SHUT
DOWN position
Not Used
No KSU power
Not Used
Not Used
Not Used
On Hook
Not Used
On Hook
Not Used
On Hook
Not Used
On Hook
Not Used
On Hook
Not Used
On Hook
Not Used
On Hook
Not Used
On Hook
Installing Electronic Telephone Units
Electra Elite
Off
down
position
Advertisement
Table of Contents
