Checking The Network Settings - Viessmann VITOCONNECT OPTO2 Installation And Operating Instructions Manual

Vitoconnect OPTO2 Installation and Operating

Checking the Network Settings

Registering Users and Setting up the Heating System
Have the following settings on the Wi-Fi router
checked and adjusted by an IT professional, if
required:
Dynamic IP addressing must be active.
Port 80, port 123, port 443 and port 8883 must be
open for outgoing connections.
1. Download the ViCare app from the App Store or
Google Play Store and install it.
2. Start the ViCare app and tap "Create account".
3. Follow the instructions in the ViCare app.
4. Scan the QR code.
or
Enter the "S/N" and "ID".
Note: QR code, "S/N" and "ID": See the supplied
Vitoconnect sticker.
5. Set up the Vitoconnect Wi-Fi: see the next chapter.
6. Connect the Vitoconnect to your home network.
The Vitoconnect and the ViCare app are set up
when the LED is illuminated in white:
(see information starting on page 11)
Android operating system: Setting up Wi-Fi
Automatic Wi-Fi connection with
"VITOCONNECT-<xxxx>".
iOS operating system: Setting up Wi-Fi
1. Open the Wi-Fi settings of your smartphone.
2. Connect your smartphone to the
"VITOCONNECT-<xxxx>" Wi-Fi.
You will be prompted to enter a password.
Note: The WPA2 password will automatically be in the
clipboard.
3. Insert the WPA2 password from the clipboard.
Commissioning
13