Wiring - Mitsubishi Electric GM-J2 Series Instruction Manual

5.

Wiring

(1) Be sure to ground the motor, and install a dedicated circuit breaker for each motor to prevent
electric leakage. If you ignore this caution, you may get an electric shock.
(2) When wiring the motor, use good wiring parts, and observe the Technical Standard for Electric
System and the Regulation specified by the corresponding electric power company. If the power
supply line is long, adjust the voltage drop to 2% or less.
(3) Install an appropriate motor circuit protector for each geared motor. Without any protector, a
problem of the motor circuit may result in a fire.
(4) Be sure to supply the power of the specified voltage. If a wrong power is supplied, a fire may
start.
－ 5 －
- 5 -