Problem Solving Guide - Miele H 7260 BP Operating And Installation Instructions

Hide thumbs Also See for H 7260 BP:

page of 104

/ 104
Contents
Table of Contents
Bookmarks

Table of Contents

With the help of the following guide, minor faults in the performance of the appliance,

some of which may result from incorrect operation, can be remedied without contacting

Miele. This will save you time and money because you won't need a service call.

Please note that a call-out charge will be applied to unnecessary service visits where

the problem could have been rectified as described in these operating instructions.

Problem

The display is dark.

The signal tone does

not sound.

The oven does not heat

up.

The sensors do not

respond.

Possible cause and remedy

You have selected the

the oven is switched off, the display is dark.

 As soon as the oven is switched on, the main menu will

appear. If you want the time of day to be displayed

constantly, select the

There is no power to the oven.

 Check if the circuit breaker has tripped. Contact a

qualified electrician or Miele.

The buzzers are deactivated or set at too low a volume.

 Switch on the buzzers or increase the volume with

the

Volume

Buzzer tones

Demo mode is active.

You can select menu options in the display and the

sensors, but the oven heating does not work.

 Deactivate Demo mode with the

programme

Demo mode

You have selected the

When the oven is switched off, the sensors do not

respond.

 As soon as the oven is switched on, the sensors will

respond. If you want the sensors to respond even

when the oven is switched off, select the

QuickTouch

The oven is not connected to the power supply.

 Make sure that the plug is correctly inserted in the

socket and that the socket switch has been

switched to on.

 Check if the circuit breaker has tripped. Contact a

qualified electrician or Miele.

There is a fault with the control unit.

 Touch and hold the On/Off  sensor until the

display switches off and the oven restarts.