ATTACHING THE HANDSET
DT830 DT430/410
STEP 1: Insert the coiled cord plug into HANDSET
connector on the back of the telephone until it
clicks.
STEP 2: Place the headset cord into the groove as
shown in the figure below.
Telephone
ATTACHING THE HEADSET
DT830 DT430/410
Connect the headset to HEADSET connector on the
back of the telephone following the procedure below.
Note:
• TO CONNECT THE HEADSET
Modular Plug
STEP 1: Insert the modular plug into HEADSET con-
Coiled Cord
STEP 2: Place the headset cord into the groove as
Groove
HANDSET
Connector
Telephone
Note:
30
The headset which can be connected to the tele-
phone is "HW251N-A10 (manufactured by Plan-
tronics)".
nector on the back of the telephone until it
clicks.
shown in the figure below, and fix it.
Modular Plug
Code
To make a call with the headset, see
OPERATION USING THE
HEADSET Connector
Groove
TERMINAL
HEADSET.